Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CUTTING EDGE FORESTRY, INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CUTTING EDGE FORESTRY, INC in MACK PINES UNIT 84, BANKS, ID 83602 (NAICS 115310). OSHA activity number 330924366.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Cutting Edge Forestry, INC — free Get an email when a new federal OSHA severe-injury report for Cutting Edge Forestry, INC is published. One employer, no account, unsubscribe in one click.
Site address
MACK PINES UNIT 84
City
BANKS
State
ID
ZIP
83602
Mailing
P.O. BOX 300, TALENT, OR 97540
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
115310
Employees
16
Ownership type
A

4 citations on file for this inspection.

1910.266 D07 I

Serious Gravity 1 11 exposed
Issued
Nov 1, 2011
Abate by
Nov 8, 2011
Penalty
Initial $2,550 · Current $1,275 Reduced
29 CFR 1910.266(d)(7)(i): Hand signals or audible contact, such as, but not limited to, whistles, horns, or radios, were not utilized whenever noise, distance, restricted visibility, or other factors prevented clear understanding of normal voice communications between employees:    a) Jobsite: On July 19, 2011 and times prior thereto, employees performing silviculture activities which included working in dense, steep terrain and the steady use of chainsaws, did not have an effective way to communicate with other crew members when needed.       Note) Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $1275
  • — Z (S) $2550

1910.266 E02 VI

Serious Gravity 5 4 exposed
Issued
Nov 1, 2011
Abate by
Nov 2, 2011
Penalty
Initial $3,400 · Current $1,700 Reduced
29 CFR 1910.266(e)(2)(vi): Chain saw(s) were not started on the ground or otherwise firmly supported:    a) Jobsite: On July 19, 2011 employee(s) drop started the Stihl MS 460 chainsaw(s) used while performing tree thinning activities.      Note) Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $1700
  • — Z (S) $3400

1910.266 E02 XIV

Serious Gravity 5 4 exposed
Issued
Nov 1, 2011
Abate by
Nov 2, 2011
Penalty
Initial $0 · Current $0
29 CFR 1910.266(e)(2)(xiv): Chain saw(s) were not shut down or the chain brake engaged whenever a saw was carried further than 50 feet (15.2 m). Chain saw(s) were not shut down or the chain brake engaged when a saw was carried less than 50 feet if conditions such as, but not limited to, the terrain, underbrush and slippery surfaces, may have created a hazard for an employee:    a) Jobsite:  On July 19, 2011 employee(s) performing tree thinning activities on steep terrain with dense underbrush did not shut down or utilize the chain brake mechanism(s) on the Stihl MS 460 chainsaws that were in use to the extent possible in order to minimize potential hazard(s) to employee(s).      Note) Abatment certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.266 D09 I

Other-than-serious 6 exposed
Issued
Oct 27, 2011
Penalty
Initial $0 · Current $0
29 CFR 1910.266(d)(9)(i): Flammable and combustible liquids were not stored, handled, transported, and used in accordance with the requirements of subpart H of Part 1910:    a) Jobsite: On July 18, 2011 and times prior thereto employees performing silviculture activities which included service and maintenance on chainsaws, used mislabeled containers to store and transport bar oil and mixed gas liquids.  Mixed gas liquids were stored and transported in bar oil containers.        b) Jobsite: On July 18, 2011 and times prior thereto employees performing silviculture activities which included service and maintenance on chainsaws, stored and transported bar oil in a yellow colored diesel fuel container.       c) Jobsite: On July 18, 2011 and times prior thereto employees performing silviculture activities which included service and maintenance on chainsaws, stored and transported bar oil and mixed gas liquids in containers that were not intended for this use, including but not limited to, windshield washer fluid and orange juice containers.         Note) Abatement certification is NOT required for this item.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Cutting Edge Forestry, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330924366.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.