Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CUTTING EDGE FORESTRY, INC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of CUTTING EDGE FORESTRY, INC in 3888 CLEAR SPRINGS RD. SW, MEADVILLE, MS 39653 (NAICS 115310). OSHA activity number 342635273.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Cutting Edge Forestry, INC — free Get an email when a new federal OSHA severe-injury report for Cutting Edge Forestry, INC is published. One employer, no account, unsubscribe in one click.
Site address
3888 CLEAR SPRINGS RD. SW
City
MEADVILLE
State
MS
ZIP
39653
Mailing
P.O. BOX 300, TALENT, OR 97540
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
115310
Employees
20
Ownership type
A

9 citations on file for this inspection.

1910.141 C01 II

Other-than-serious 1 instance 17 exposed
Issued
Mar 8, 2018
Abate by
Mar 13, 2018
Penalty
Initial $7,760 · Current $5,400 Reduced
29 CFR 1910.141(c)(1)(ii): The requirements of paragraph (c)(1)(i) of this section do not apply to mobile crews or to normally unattended work locations so long as employees working at these locations have transportation immediately available to nearby toilet facilities which meet the other requirements of this subparagraph.    a) On or about September 9, 2017 toilet facilities were not provided for approximately seventeen employees felling trees at the Homochitto National Forest.
Recent events (2)
  • — I (O) $5400
  • — Z (S) $7760

1910.266 D01 VII B

Other-than-serious 1 instance 1 exposed
Issued
Mar 8, 2018
Abate by
Mar 12, 2018
Penalty
Initial $5,174 · Current $1,200 Reduced
29 CFR 1910.266(d)(1)(vii)(B): Face protection meeting the requirements of subpart I of Part 1910 where there is potential for facial injury such as, but not limited to, operating a chipper. Logger-type mesh screens may be worn by employees performing chain-saw operations and yarding.   Note to paragraph (d)(1)(vii): The employee does not have to wear a separate eye protection device where face protection covering both the eyes and face is worn.     a) On or about September 9, 2017 an employee operating a chain saw was not wearing protection to protect against facial injuries.
Recent events (2)
  • — I (O) $1200
  • — Z (S) $5174

1910.266 D02 I

Other-than-serious 2 instances 17 exposed
Issued
Mar 8, 2018
Abate by
Mar 12, 2018
Penalty
Initial $5,174 · Current $3,350 Reduced
29 CFR 1910.266(d)(2)(i): The employer shall provide first-aid kits at each work site where trees are being cut (e.g., felling, buckling, limbing), at each active landing, and on each employee transport vehicle. The number of first-aid kits and the content of each kit shall reflect the degree of isolation, the number of employees, and the hazards reasonably anticipated at the work site.    a) On or about September 9, 2017 first aid kits were not provided where trees were being felled. in the Homochitto National Forest.
Recent events (2)
  • — I (O) $3350
  • — Z (S) $5174

1910.266 H01 VI

Serious Gravity 10 1 instance 17 exposed
Issued
Mar 8, 2018
Abate by
Mar 12, 2018
Penalty
Initial $12,934 · Current $12,934
29 CFR 1910.266(h)(1)(vi): Each danger tree shall be felled, removed or avoided. Each danger tree, including lodged trees and snags, shall be felled or removed using mechanical or other techniques that minimize employee exposure before work is commenced in the area of the danger tree. If the danger tree is not felled or removed, it shall be marked and no work shall be conducted within two tree lengths of the danger tree unless the employer demonstrates that a shorter distance will not create a hazard for an employee.  a) On or about September 9, 2017 a danger or lodged tree in the cutting area fell onto a tree that was being felled came in contact with a tree striking the feller resulting into his death.
Recent events (2)
  • — I (S) $12934
  • — Z (S) $12934

1910.266 H02 VI

Serious Gravity 10 6 instances 17 exposed
Issued
Mar 8, 2018
Abate by
Mar 30, 2018
Penalty
Initial $9,054 · Current $9,054
29 CFR 1910.266(h)(2)(vi): A backcut shall be made in each tree being felled. The backcut shall leave sufficient hinge wood to hold the tree to the stump during most of its fall so that the hinge is able to guide the tree's fall in the intended direction.  a) On or about September 12, 2017 employee making a back cut on a tree being felled in his cutting area did not leave sufficient hinge to fell a tree in a safe direction that was exposed to struck by hazards.
Recent events (2)
  • — I (S) $9054
  • — Z (S) $9054

1910.266 H02 VII

Serious Gravity 5 6 instances 17 exposed
Issued
Mar 8, 2018
Abate by
Mar 30, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.266(h)(2)(vii): The backcut shall be above the level of the horizontal facecut in order to provide an adequate platform to prevent kickback. Exception: The backcut may be at or below the horizontal facecut in tree pulling operations.  Note to paragraph (h)(2)(vii): This requirement does not apply to open face felling where two angled facecuts rather than a horizontal facecut are used.  a) On or about September 12, 2017 backcut were not made above the horizontal facecut, exposing employees to struck by hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.266 I05 IV

Deleted Serious Gravity 10 1 instance 17 exposed
Issued
Mar 8, 2018
Abate by
Mar 30, 2018
Penalty
Initial $9,054 · Current $0 Reduced
29 CFR 1910.266(i)(5)(iv): The employer is responsible for ensuring that each current and new employee can properly and safely perform the work tasks and operate the tools, equipment, machines, and vehicles used in their job.   a) On or about September 12, 2017 employee felling trees was not trained sufficiently to cut trees of a bigger diameter in making conventional cuts, employee only had experience in thinning trees.
Recent events (2)
  • — I (S) $0
  • — Z (S) $9054

1910.1200 E01

Other-than-serious 1 instance 17 exposed
Issued
Mar 8, 2018
Abate by
Mar 30, 2018
Penalty
Initial $3,880 · Current $0 Reduced
29 CFR 1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:      a) On or about September 12, 2017 employer has not implemented a written hazard communication program to address training, exposure to chemicals, and labeling of gasoline and oil containers.
Recent events (2)
  • — I (O) $0
  • — Z (S) $3880

1910.95 I02

Deleted Other-than-serious 1 instance 1 exposed
Issued
Mar 8, 2018
Abate by
Mar 12, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.95(i)(2): Employers shall ensure that hearing protectors are worn:  a) On or about September 13, 2017 employee using a STIHL chain saw felling trees were not wearing hearing protection.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Cutting Edge Forestry, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342635273.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.