DENVER, CO —
OSHA Inspection: FAST FRAMING INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FAST FRAMING INC. in 8581 EAST 21ST AVENUE, DENVER, CO 80238 (NAICS 238130). OSHA activity number 330967944.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FAST FRAMING INC.
- Site address
- 8581 EAST 21ST AVENUE
- City
- DENVER
- State
- CO
- ZIP
- 80238
- Mailing
- 2132 SOUTH QUENTIN WAY UNIT 101, AURORA, CO 80014
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.404 F06
- Issued
- Aug 3, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) Fast Framing Inc. at 8581 East 21st Avenue, Denver, CO 80238: On or before 7/30/11, the employer allowed employees to use a yellow electrical cord that was not grounded. The cord was used to power a Mag 77 Skilsaw, and a Rolair air compressor model 6820K170001, serial number 10010791. Both tools were not double insulated. The cord was plugged into a temporary panel with a ground fault circuit interrupter (GFCI). Condition exposed employees to electrical shock hazards. Abatement note: Abatement certification is required for this item (See enclosed "Sample Abatement-Certification Letter").
Recent events (1)
- — Z (O) $0
1926.416 E01
- Issued
- Aug 3, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) Fast Framing Inc. at 8581 East 21st Avenue, Denver, CO 80238: On or before 7/30/11, the employer allowed employees to use a worn and frayed yellow electrical cord. The cord was used to power a Mag 77 Skilsaw, and a Rolair air compressor model 6820K170001, serial number 10010791. Both tools were not double insulated. The cord was plugged into a temporary panel with a ground fault circuit interrupter (GFCI). Condition exposed employees to electrical shock hazards. Abatement note: Abatement certification is required for this item (See enclosed "Sample Abatement-Certification Letter").
Recent events (1)
- — Z (O) $0
1926.502 B03
- Issued
- Aug 3, 2011
- Abate by
- Aug 24, 2011
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(b)(3): Guardrail systems were not capable of withstanding, without failure, a force of at least 200 pounds (890 N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge: a) Fast Framing Inc. at 8581 East 21st Avenue, Denver, CO 80238: On or before 7/30/11, the employer did not ensure that the guardrails around the stairway openings on both the main floor and the second floor were capable of withstanding a force of 200 pounds. The horizontal guardrails consisted of construction grade 2 x 4's with posts that were 10.5 feet apart. Conditions exposed employees to fall hazards of up to 20 feet to the basement. Abatement note: Abatement certification is required for this item (See enclosed "Sample Abatement-Certification Letter"). Abatement note: 1926 Subpart M Appendix B provides that the posts shall be spaced not more than 8 feet apart.
Recent events (1)
- — Z (O) $0
More inspections at Fast Framing INC.
View Fast Framing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330967944.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.