Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BATES FRAMING, INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of BATES FRAMING, INC in LOT 03, BLOCK 02 SPUR WING GREENS SUB DIVISION TREE FARM, MERIDIAN, ID 83642 (NAICS 238130). OSHA activity number 330974502.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bates Framing, INC — free Get an email when a new federal OSHA severe-injury report for Bates Framing, INC is published. One employer, no account, unsubscribe in one click.
Establishment
BATES FRAMING, INC
Site address
LOT 03, BLOCK 02 SPUR WING GREENS SUB DIVISION TREE FARM
City
MERIDIAN
State
ID
ZIP
83642
Mailing
6751 HWY 36, WILTON, ND 58579
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 6, 2011
Abate by
Sep 13, 2011
Penalty
Initial $2,400 · Current $1,000 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to structural collapse: \\r\\n\\r\\n(a) (a)	Roof top: On 08/12/2011 and at times prior thereto, three employees were installing sheathing on 10:12 pitched roof 10.7 to 24.0 feet above the ground or floor below without temporary horizontal and diagonal bracing.\\r\\n\\r\\nNOTE #1: Among other methods, one or more feasible and acceptable method to correct the hazards is to follow the guidance provided in the Building Component Safety Information BCSI-B1, and B2 and B3 which instructs that lateral and diagonal temporary bracing be installed to prevent structural collapse. \\r\\n\\r\\nNote #2: Abatement certification IS required for this item.\\r\\n
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2400

1926.100 A

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 6, 2011
Abate by
Sep 7, 2011
Penalty
Initial $1,800 · Current $800 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, were not protected by protective helmets.\\r\\n\\r\\n(a) On site ground: On 08/12/2011 and at times prior thereto, an employee worked below another employee on the roof without head protection\\r\\n\\r\\nNote: Abatement certification IS required for this item.\\r\\n
Recent events (2)
  • — I (S) $800
  • — Z (S) $1800

1926.1053 B01

Serious Gravity 1 2 instances 1 exposed
Issued
Sep 6, 2011
Abate by
Sep 7, 2011
Penalty
Initial $1,800 · Current $800 Reduced
29 CFR 1926.1053(b)(1): Portable ladders  used for access to an upper landing surface, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access;\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\n\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\n(a) (a)	On Site: On 08/12/2011 and at times prior thereto, aluminum extension ladder extended only one rung (approximately 12 inches) above the roof eve.\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\n(b) (b)	On Site: On 08/12/2011 and at times prior thereto, Little Giant ladder rails were almost flush the roof eve.\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\n\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\nNote: Abatement certification IS required for this item.\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\n
Recent events (2)
  • — I (S) $800
  • — Z (S) $1800

1926.501 B13

Repeat Gravity 1 1 instance 1 exposed
Issued
Sep 6, 2011
Abate by
Sep 7, 2011
Penalty
Initial $3,600 · Current $2,700 Reduced
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities six feet or more above a lower level were not protected by guard rail systems, safety net systems, or personal fall arrest systems:\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\n\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\n(a) (a)\tRoof top: On 08/12/2011 and at times prior thereto, three employees engaged in sheathing activities on 10:12 pitched roof 10.7 to 24.0 feet above the ground or floor below without fall protection or using alternative means of fall protection.\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\n\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\Note #1: Bates Framing, Inc. was previously cited for a violation of this occupational safety and health standard which was contained in OSHA inspection number 315028142, citation number 01, item number 001 and was affirmed as a final order on March 10, 2011, with respect to a workplace located at Lot 3, Blk 2 South Shakespeare Way, Boise, Idaho.\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\nNote #2: Bates Framing, Inc. was previously cited for a violation of this occupational safety and health standard which was contained in OSHA inspection number 313356198, citation number 01, item number 002, instance b and was affirmed as a final order on November 2, 2010, with respect to a workplace located at Lot 12 Blk 4, Boise, ID.\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\nNote #3: Abatement certification IS required for this item.\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\n
Recent events (2)
  • — I (R) $2700
  • — Z (R) $3600

1926.503 A02 III

Repeat 1 instance 1 exposed
Issued
Sep 6, 2011
Abate by
Sep 7, 2011
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(2)(iii): 29 CFR 1926.503 (a)(2)(iii): The employer did not assure that each employee had been trained, as necessary, by a competent person qualified in the use and operation of guardrails systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used:\\\\\\\\r\\\\\\\\n\\\\\\\\r\\\\\\\\n(a) Specific location: On 08/12/2011 and at times prior thereto, employees and the responsible person on site, did not recognize the fall hazards when performing roof sheathing activities while on a 10:12 pitched roof and take the appropriate actions to eliminate or minimize the hazard.\\\\\\\\r\\\\\\\\n\\\\\\\\r\\\\\\\\nNote #1: Bates Framing Inc., was previously cited for a violation of this occupational safety and health standard which was contained in OSHA inspection number 315028142, citation number 2, item number 1 and was affirmed as a final order on March 10, 2011 with respect to a workplace located at Lot 3, Blk 2 South Shakespeare Way, Boise, Idaho.\\\\\\\\r\\\\\\\\nNote #2: Abatement certification IS required for this item.\\\\\\\\r\\\\\\\\n\\\\\\\\r\\\\\\\\n\\\\\\\\r\\\\\\\\n
Recent events (2)
  • — I (R) $0
  • — Z (R) $0

1926.102 A01

Repeat Gravity 1 1 instance 1 exposed
Issued
Sep 6, 2011
Abate by
Sep 7, 2011
Penalty
Initial $3,600 · Current $2,700 Reduced
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents.\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\n\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\n(a) On the roof: On 08/12/20/11 and at times prior thereto, employees were using pneumatic nail guns, pneumatic staplers and skill saws without eye or face protection\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\n\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\nNote: Abatement certification IS required for this item.\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\r\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\n
Recent events (2)
  • — I (R) $2700
  • — Z (R) $3600

View Bates Framing, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330974502.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.