Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SOUTHERN FIELD WELDING, LLC

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of SOUTHERN FIELD WELDING, LLC in 238 WEST 35 SOUTH, BURLEY, ID 83318 (NAICS 332420). OSHA activity number 330982729.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Southern Field Welding, LLC — free Get an email when a new federal OSHA severe-injury report for Southern Field Welding, LLC is published. One employer, no account, unsubscribe in one click.
Site address
238 WEST 35 SOUTH
City
BURLEY
State
ID
ZIP
83318
Mailing
238 WEST 35 SOUTH, BURLEY, ID 83318
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332420
Employees
80
Ownership type
A

7 citations on file for this inspection.

1910.132 C

Serious Gravity 5 2 instances 2 exposed
Issued
Oct 11, 2011
Abate by
Nov 1, 2011
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.132(c): All personal protective equipment was not of safe design and construction for the work performed.    (a) Paint Area of the Fabrication shop; on or about August 30, 2011 and at times prior thereto, employees wearing coveralls and gloves that were ineffective protection against epoxy coating materials used on to coat the inside of tanks and against hexamethylene diisocyanates used in the outside coating of tanks.      Note:  Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1910.132 D01

Serious Gravity 5 2 instances 20 exposed
Issued
Oct 11, 2011
Abate by
Nov 1, 2011
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards were present, or were likely to be present, which necessitated the use of personal protective equipment:    (a) Paint Area of the Fabrication shop; on or about August 30, 2011 and at times prior thereto, the employer did not assess the workplace hazards of coating solvents and activators.    Note:  Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1910.132 F01

Serious Gravity 5 2 instances 20 exposed
Issued
Oct 11, 2011
Abate by
Nov 1, 2011
Penalty
Initial $2,800 · Current $0 Reduced

Hazardous substances 1377246024972590

29 CFR 1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment, to know the limitations of the Personal Protective Equipment (PPE):    (a) Paint Area of the Fabrication shop; on or about August 30, 2011 and at times prior thereto, employees wearing hand and body protection that was inadequate to protect against triethylenetetramine in the interior epoxy coating and hexamethylene diisocyantes in the exterior coating of tanks.    Note:  Abatement certification is required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1910.1200 H03

Serious Gravity 5 2 instances 20 exposed
Issued
Oct 11, 2011
Abate by
Nov 1, 2011
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1910.1200(h)(3):  The employee training did not include the requirements of 29 CFR 1910.1200(h)(3)(i) through (h)(3)(iv):    (a)  Paint Area of the Fabrication shop; on or about August 30, 2011 and at times prior thereto, employees coating the inside of tanks, had not received training on the hazards described in the Material Safety Data Sheets of Phenoline 309, Parts A & B, containing triethylenetetramine.     (b)  Paint Area of the Fabrication shop; on or about August 30, 2011 and at times prior thereto, employees coating the outside of tanks, had not received training on the hazards described in the Material Safety Data Sheets of 2001 Urethane Activator containing hexamethylene diisocyanates.    Note:  Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1910.146 C04

Serious Gravity 5 2 instances 20 exposed
Issued
Oct 11, 2011
Abate by
Nov 1, 2011
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.146(c)(4): When the employer decided that its employees would enter permit spaces, the employer did not develop and implement a written permit space entry program that complied with 29 CFR 1910.146:    (a) Paint Area of the Fabrication shop; on or about August 30, 2011 and at times prior thereto, a written confined space program was not fully documented and implemented.    Note:  Abatement certification is required for this item;
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1910.146 D05 III

Serious Gravity 5 2 instances 20 exposed
Issued
Oct 11, 2011
Abate by
Nov 1, 2011
Penalty
Initial $2,800 · Current $0 Reduced
1910.146(d)(5)(iii):  Under the permit-required confined space program required by 29 CFR 1910.146(c)(4), when testing for atmospheric hazards, the employer did not evaluate permit space conditions when entry operations were conducted by testing first for oxygen, then for combustible gases and vapors, and then for toxic gases and vapors.           (a) Paint Area of the Fabrication shop; on or about August 30, 2011 and at times prior thereto, employee entered a confined space without testing for oxygen or combustible vapors.      Note:  Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1910.146 D09

Serious Gravity 5 2 instances 20 exposed
Issued
Oct 11, 2011
Abate by
Nov 1, 2011
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1910.146(d)(9):  Under the permit-required confined space program required by 29 CFR 1910.146(c)(4), the employer did not develop and implement procedures for summoning rescue and emergency services, for rescuing entrants from permit spaces.    (a)  Fabrication shop; on or about August 30, 2011 and at times prior thereto, the written confined space program did not have written and implemented procedures or contacts for emergency rescue from confined spaces.    Note:  Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

View Southern Field Welding, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 330982729.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.