BOULDER, CO ·
OSHA Inspection: FREEWAVE TECHNOLOGIES, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of FREEWAVE TECHNOLOGIES, INC. in 1880 S FLATIRON COURT SUITE F, BOULDER, CO 80301 (NAICS 334220). OSHA activity number 331080465.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FREEWAVE TECHNOLOGIES, INC.
- Site address
- 1880 S FLATIRON COURT SUITE F
- City
- BOULDER
- State
- CO
- ZIP
- 80301
- Mailing
- 1880 S FLATIRON COURT SUITE F, BOULDER, CO 80301
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334220
- Employees
- 85
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.1200 E01
- Issued
- Dec 14, 2011
- Abate by
- Jan 13, 2012
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1) The employer did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met: (a) FreeWave Technologies, Inc. at 1880 S. Flatiron Ct. Suite F in Boulder, CO: The employer did not develop, implement, and maintain at the workplace a written hazard communication program which describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met. This condition exposed employees to chemical and dust hazards. Abatement Note: The written program must also include a list of hazardous chemicals and specify how employees will be trained prior to conducting non-routine tasks. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- · I (S) $1260
- · Z (S) $2100
1910.1025 L01 I
- Issued
- Dec 14, 2011
- Abate by
- Jan 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1025(l)(1)(i) Each employer who has a workplace in which there is a potential exposure to airborne lead at any level shall inform employees of the content of Appendices A and B of this regulation: (a) FreeWave Technologies, Inc. at 1880 S. Flatiron Ct. Suite F in Boulder, CO: The employer did not inform employees of the content of Appendices A and B of the lead regulation. This condition exposed employees to lead hazards. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.1200 H01
- Issued
- Dec 14, 2011
- Abate by
- Jan 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1) Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees have not previously been trained about is introduced into their work area. Chemical-specific information must always be available through labels and material safety data sheets. (a) FreeWave Technologies, Inc. at 1880 S. Flatiron Ct. Suite F in Boulder, CO: The employer did not provide employees with effective information and training on hazardous chemicals in their work area. Production employees use soldering wire and flux pens. In addition solder paste used at the SMT machine contains rosin. This condition exposed employees to chemical hazards. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.132 D02
- Issued
- Dec 14, 2011
- Abate by
- Jan 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: (a) FreeWave Technologies, Inc. at 1880 S. Flatiron Ct. Suite F in Boulder, CO: The employer did not verify, through written certification, that the required workplace hazard assessment had been performed. Personal protective equipment provided drum handling and filter maintenance was not documented in a workplace hazard assessment. This condition exposed employees to chemical and physical hazards. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.141 G02
- Issued
- Dec 14, 2011
- Abate by
- Jan 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.141(g)(2): No employee shall be allowed to consume food or beverages in a toiletroom nor in any area exposed to a toxic material: (a) FreeWave Technologies, Inc. at 1880 S. Flatiron Ct. Suite F in Boulder, CO: On and before October 27, 2011 employees were allowed to consume beverages in an area exposed to a toxic material in that production employees were allowed to have drinks at their work stations. This condition exposed employees to health hazards including lead found in solder. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 334220)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331080465.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.