Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ADA-CAN CONSTRUCTION, INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ADA-CAN CONSTRUCTION, INC in LOT 11 BLK 10, MERIDIAN, ID 83680 (NAICS 238130). OSHA activity number 331089706.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ada-Can Construction, INC — free Get an email when a new federal OSHA severe-injury report for Ada-Can Construction, INC is published. One employer, no account, unsubscribe in one click.
Site address
LOT 11 BLK 10
City
MERIDIAN
State
ID
ZIP
83680
Mailing
1550 ARTESIAN ROAD, EAGLE, ID 83616
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.501 B13

Serious Gravity 5 2 exposed
Issued
Dec 2, 2011
Abate by
Dec 5, 2011
Penalty
Initial $2,400 · Current $900 Reduced
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest systems, nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502:    a) Jobsite: On November 10, 2011 and times prior thereto employees performed sheathing activities on a six in twelve and seven in twelve pitched roof without a fall protection system in place.       b) Jobsite: On November 10, 2011 and times prior thereto employees performing framing activities were exposed to a fall hazard from the second floor level where a guardrail system was not in place along an open sided floor.      Note) Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $900
  • — Z (S) $2400

1926.503 A02 II

Serious 3 exposed
Issued
Dec 2, 2011
Abate by
Feb 1, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(2)(ii): The employer did not assure that each employee had been trained, as necessary, by a competent person in the use and operation of guardrail systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used:    a) Jobsite: On November 10, 2011 and times prior thereto the responsible person on site and employees performing framing activities were not familiar with fall protection systems required for residential construction.    b) Jobsite: On November 10, 2011 and times prior thereto the responsible person and employees performing framing activities did not recognize the hazard of an open sided floor, and take action to minimize or eliminate this hazard.      Note) Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1052 C01 II

Serious Gravity 1 2 exposed
Issued
Dec 2, 2011
Abate by
Dec 5, 2011
Penalty
Initial $1,800 · Current $900 Reduced
29 CFR 1926.1052(c)(1)(ii): Stairways having more than four risers or rising more than 30 inches was not equipped with one stairrail system along each unprotected side or edge:      a) Jobsite: On November 10, 2011 and times prior thereto the interior stairway used for access to and from the second floor level did not have a stairrail system in place.  Stairway had approximately 11 risers.    Note) Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $900
  • — Z (S) $1800

1926.1052 C12

Serious Gravity 1 2 exposed
Issued
Dec 2, 2011
Abate by
Dec 5, 2011
Penalty
Initial $0 · Current $0
29 CFR 1926.1052(c)(12): Unprotected sides and edges of stairway landings were not provided with guardrail systems:    a) Jobsite: On November 10, 2011 and times prior thereto employees performing framing activities were exposed to a fall hazard at the stairway landing where a guardrail system was not in place.     Note) Abatement certification IS required for this item.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.403 B02

Repeat 2 exposed
Issued
Dec 2, 2011
Abate by
Dec 5, 2011
Penalty
Initial $120 · Current $100 Reduced
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:    a) Jobsite: On November 10, 2011 and times prior thereto, two seperate metal, four-way electrical junction boxes were used with flexible cords as part of the temporary power system for tools and equipment.      Note 1) Ada-Can Construction, Inc ., was previously cited for a violation of this Occupational Safety and Health standard which was contained in OSHA inspection number 313352601, citation 2, item 2, and was affirmed as a final order on August 18, 2010, with respect to a workplace located at 2542 Vizcaya, Eagle, ID.     Note 2) Abatement certification and documention ARE required for this item.
Recent events (2)
  • — I (R) $100
  • — Z (R) $120

View Ada-Can Construction, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331089706.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.