MARION, IL —
OSHA Inspection: TIMBERLINE FISHERIES CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TIMBERLINE FISHERIES CORPORATION in 201 EAST TIMBERLINE ROAD, MARION, IL 62959 (NAICS 424990). OSHA activity number 331899815.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TIMBERLINE FISHERIES CORPORATION
- Site address
- 201 EAST TIMBERLINE ROAD
- City
- MARION
- State
- IL
- ZIP
- 62959
- Mailing
- 201 EAST TIMBERLINE ROAD, MARION, IL 62959
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424990
- Employees
- 120
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.37 A03
- Issued
- Apr 17, 2012
- Abate by
- Apr 18, 2012
- Penalty
- Initial $2,700 · Current $1,890 Reduced
General-duty citation text
29 CFR 1910.37(a)(3):Exit routes were not free and unobstructed. Materials and equipment were placed temporarily within the exit route: Employees working and traveling outside the C-9 office were exposed to fire hazards due to obstructed emergency egress exits and the employer did not ensure exits were maintained free of obstructive materials.
Recent events (2)
- — I (S) $1890
- — Z (S) $2700
1910.38 A
- Issued
- Apr 17, 2012
- Abate by
- May 8, 2012
- Penalty
- Initial $4,500 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.38(a): The employer did not have an emergency action plan when an OSHA standard in this part requires one: Employees performing work throughout the facility were exposed to fire and emergency egress hazards and the employer failed to develop and implement an emergency action plan as required by 1910.157(a).
Recent events (2)
- — I (S) $3150
- — Z (S) $4500
1910.39 A
- Issued
- Apr 17, 2012
- Abate by
- May 8, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.39(a): The employer did not have a fire prevention plan when an OSHA standard in this part requires one: Employees performing work throughout the facility were exposed to fire hazards and the employer failed to develop and implement a fire prevention plan as required by 1910.157(a).
Recent events (1)
- — Z (S) $0
1910.157 A
- Issued
- Apr 17, 2012
- Abate by
- May 8, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(a): Extinguishers are provided but are not intended for employee use and the employer did not develop an emergency action plan and a fire prevention plan which meets the requirements of 1910.38 and 1910.39 respectively: Employees performing work throughout the facility were required to evacuate the structure in the event of a fire and the employer failed to develop and implement an emergency action plan and fire prevention plan.
Recent events (1)
- — Z (S) $0
1910.157 E05
- Issued
- Apr 17, 2012
- Abate by
- Apr 18, 2012
- Penalty
- Initial $5,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.157(e)(5): Alternate equivalent fire protection was not provided when portable fire extinguishers were removed from service for maintenance and recharging: Employees in the C-Building hallway were exposed to fire hazards and the employer did not ensure fire extinguishers removed from service for maintenance and recharging were replaced with equivalent fire protection.
Recent events (2)
- — I (O) $0
- — Z (S) $5400
1910.212 A01
- Issued
- Apr 17, 2012
- Penalty
- Initial $6,300 · Current $4,410 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Employees performing box assembly by using an Ideal Straight Arm Stitcher Model: M3-12 and (two) IS-1244 Serial #: S7575, A-27846, A-47012 were exposed to amputation hazards and the employer did not ensure the cam cover was closed before operating.
Recent events (2)
- — I (S) $4410
- — Z (S) $6300
More inspections at Timberline Fisheries Corporation
View Timberline Fisheries Corporation's full OSHA safety record →
More inspections in this industry (NAICS 424990)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331899815.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.