PAULDING, OH —
OSHA Inspection: INSOURCE TECHNOLOGIES, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of INSOURCE TECHNOLOGIES, INC. in 12124 CO. RD. 111, PAULDING, OH 45879 (NAICS 335999). OSHA activity number 331900795.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INSOURCE TECHNOLOGIES, INC.
- Site address
- 12124 CO. RD. 111
- City
- PAULDING
- State
- OH
- ZIP
- 45879
- Mailing
- 12124 CO. RD. 111, PAULDING, OH 45879
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 335999
- Employees
- 78
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Jul 17, 2012
- Abate by
- Aug 7, 2012
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) InSource Technologies, Inc. - Paulding, Ohio: On or about January 26, 2012, the employer did not ensure that one or more methods of machine guarding was provided to protect operators of the 16-Head Composite & Wire Machinery (0.33 HP, 1750 RPM) wire braiding machine from moving parts, exposing employees to caught-in and struck-by hazards that could result in lacerations and broken bones. b) InSource Technologies, Inc. - Paulding, Ohio: On or about January 26, 2012, the employer did not ensure that one or more methods of machine guarding was provided to protect operators of the 24-Head Composite & Wire Machinery (0.5 HP, 1750 RPM) wire braiding machine from moving parts, exposing employees to caught-in and struck-by hazards that could result in lacerations and broken bones. c) InSource Technologies, Inc. - Paulding, Ohio: On or about January 26, 2012, the employer did not ensure that one or more methods of machine guarding was provided to protect operators of the 24-Head Composite & Wire Machinery (0.5 HP, 1750 RPM) wire braiding machine from moving parts, exposing employees to caught-in and struck-by hazards that could result in lacerations and broken bones.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1910.219 C03
- Issued
- Jul 17, 2012
- Abate by
- Aug 7, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(3): Vertical and inclined shafting seven (7) feet or less from floor or working platform, excepting maintenance runways, was not enclosed with a stationary casing in accordance with requirements of paragraphs (m) and (o) of this section: a) InSource Technologies Inc. - Paulding, Ohio: On or about January 26, 2012, the employer did not ensure that the rotating vertical shaft of the 16-Head Composite & Wire Machinery wire braiding machine was enclosed in a stationary casing, exposing employees to caught-by hazards. b) InSource Technologies Inc. - Paulding, Ohio: On or about January 26, 2012, the employer did not ensure that the rotating vertical shaft of the 24-Head Composite & Wire Machinery wire braiding machine was enclosed in a stationary casing, exposing employees to caught-by hazards. c) InSource Technologies Inc. - Paulding, Ohio: On or about January 26, 2012, the employer did not ensure that the rotating vertical shaft of the 24-Head Composite & Wire Machinery wire braiding machine was enclosed in a stationary casing, exposing employees to caught-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 III
- Issued
- Jul 17, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years: a) InSource Technologies Inc. - Paulding, Ohio: On or about January 26, 2012, the employer failed to evaluate employees who operated the Crown forklift once every 3 years to ensure safe operation of the vehicle.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1025 L01 I
- Issued
- Jul 17, 2012
- Abate by
- Aug 7, 2012
- Penalty
- Initial $0 · Current $0
1591
General-duty citation text
29 CFR 1910.1025(l)(1)(i): The employer who has a workplace in which there is a potential exposure to airborne lead at any level did not inform employees of the content of Appendices A and B of this regulation: a) InSource Technologies, Inc. - Paulding, Ohio: On or about January 26, 2012, the employer failed to adequately train employees performing soldering on the hazards associated with lead (Pb), exposing them to potential health effects from the toxic material.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H03 II
- Issued
- Jul 17, 2012
- Abate by
- Aug 7, 2012
- Penalty
- Initial $0 · Current $0
159122402430
General-duty citation text
29 CFR 1910.1200(h)(3)(ii): Employee training did not include the physical and health hazards of the chemicals in the work area: a) InSource Technologies Inc. - Paulding, Ohio: On or about January 26, 2012, the employer failed to adequately train employees performing soldering and tinning on the hazards of the chemicals they were working with. Employees were exposed to chemicals, such as, but not limited to, lead, tin, silver, copper, and soldering flux.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Insource Technologies, INC.
View Insource Technologies, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 335999)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331900795.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.