SAINT CHARLES, MO —
OSHA Inspection: RELIANCE TOOL & ENGINEERING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RELIANCE TOOL & ENGINEERING in 1779 SCHERER PARKWAY, SAINT CHARLES, MO 63303 (NAICS 332999). OSHA activity number 332822881.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RELIANCE TOOL & ENGINEERING
- Site address
- 1779 SCHERER PARKWAY
- City
- SAINT CHARLES
- State
- MO
- ZIP
- 63303
- Mailing
- 1779 SCHERER PARKWAY, SAINT CHARLES, MO 63303
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 20
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- May 3, 2012
- Abate by
- Jun 15, 2012
- Penalty
- Initial $2,550 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: Location: In the manufacturing area at the Reliance Tool & Engineering facility at 1779 Scherer Parkway in St. Charles, MO 63303. The employer did not ensure that the interlock guards on the CNC machines were functioning to ensure that workers could not place any part of their body in the cutting area of the machine head on the following machines: A. The Fidia CNC Mill, Model K165/BSH B. The Okuma CNC, Model Cadet-V C. The Studer LeanPro Granitan CNC, Type S30
Recent events (2)
- — I (S) $1785
- — Z (S) $2550
1910.215 A04
- Issued
- May 3, 2012
- Abate by
- Jun 15, 2012
- Penalty
- Initial $1,530 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Location: In the manufacturing area at the Reliance Tool & Engineering facility at 1779 Scherer Parkway in St. Charles, MO 63303. The employer did not ensure that the work rests of the Sears and DeWalt bench grinders were adjusted within 1/8 inch of the wheel.
Recent events (2)
- — I (S) $1071
- — Z (S) $1530
1910.215 B09
- Issued
- May 3, 2012
- Abate by
- Jun 15, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Location: In the manufacturing area at the Reliance Tool & Engineering facility at 1779 Scherer Parkway in St. Charles, MO 63303. The employer did not ensure that the tongue guard was adjusted within 1/4 inch of the Sears and DeWalt bench grinders.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- May 3, 2012
- Abate by
- Jun 15, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: Location: At the Haas and Okuma CNC machines at Reliance Tool & Engineering, 1779 Scherer Parkway, St. Charles, MO 63303. The employer did not ensure that air nozzles used for cleaning chips on the Haas and Okuma CNC machines were reduced to less than 30 psi when dead ended.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Reliance Tool & Engineering
View Reliance Tool & Engineering's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332822881.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.