BLACK RIVER FALLS, WI —
OSHA Inspection: HART TIE & LUMBER COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HART TIE & LUMBER COMPANY, INC. in 518 WINNEBAGO ST., BLACK RIVER FALLS, WI 54615 (NAICS 321918). OSHA activity number 332823343.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HART TIE & LUMBER COMPANY, INC.
- Site address
- 518 WINNEBAGO ST.
- City
- BLACK RIVER FALLS
- State
- WI
- ZIP
- 54615
- Mailing
- P.O. BOX 10, BLACK RIVER FALLS, WI 54615
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 33
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.219 D01
- Issued
- May 17, 2012
- Abate by
- Jun 1, 2012
- Penalty
- Initial $2,618 · Current $1,570 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Main production floor; The drive motor cover for the Moulder had a hole, exposing the pulleys.
Recent events (2)
- — I (S) $1570
- — Z (S) $2618
1910.219 E03 I
- Issued
- May 17, 2012
- Abate by
- Jun 1, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): (a) Main production floor; The drive motor cover for the Moulder had a hole, exposing the drive belts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- May 17, 2012
- Abate by
- Jun 1, 2012
- Penalty
- Initial $5,390 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Dimension plant; Energy control procedures were not developed to inlcude wind down and elimination of stored energy in moving parts, such as, but not limited to; the saw blades of the double end tenoner saw.
Recent events (2)
- — I (S) $0
- — Z (S) $5390
1910.147 C07 I
- Issued
- May 17, 2012
- Abate by
- Jun 15, 2012
- Penalty
- Initial $0 · Current $2,695
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: (a) Throughout the facility; Employees worked on equipment that was not locked out with all energies dissipated, indicating a training deficiency in the energy control program.
Recent events (2)
- — I (S) $2695
- — Z (S) $0
1910.147 D04 I
- Issued
- May 17, 2012
- Abate by
- Jun 1, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) Dimension plant; Employees conducted maintenance activities, such as conducting set up on a double end tenoner saw and did not lockout the machine and ensure that all energy sources were dissipated.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.151 C
- Issued
- May 17, 2012
- Abate by
- Jun 1, 2012
- Penalty
- Initial $1,963 · Current $1,178 Reduced
General-duty citation text
29 CFR 1910.151(c): Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use: (a) Forklift charging station; employees serviced acid batteries and did not have emergency eye flushing means available.
Recent events (2)
- — I (S) $1178
- — Z (S) $1963
1904.29 B03
- Issued
- May 17, 2012
- Abate by
- May 29, 2012
- Penalty
- Initial $655 · Current $393 Reduced
General-duty citation text
29 CFR 1904.29(b)(3): 29 CFR 1904.29(b)(3): The employer did not fill out or correctly fill out an OSHA Form 300 or equivalent for each recordable injury or illness within 7 calendar days of notification of an injury or illness: (a) Throughout the facility; Following an amputation in the workplace, the employer failed to record the employee injury on the OSHA 300 log, or its equivalent, for 76 days.
Recent events (2)
- — I (O) $393
- — Z (O) $655
More inspections at Hart TIE & Lumber Company, INC.
View Hart TIE & Lumber Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 332823343.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.