CHICAGO, IL —
OSHA Inspection: LIPRUS U MASONRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LIPRUS U MASONRY, INC. in 2801 W. PRATT BLVD., CHICAGO, IL 60645 (NAICS 238140). OSHA activity number 333886851.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LIPRUS U MASONRY, INC.
- Site address
- 2801 W. PRATT BLVD.
- City
- CHICAGO
- State
- IL
- ZIP
- 60645
- Mailing
- 1814 N. PARK DRIVE, MOUNT PROSPECT, IL 60056
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 7
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 L01 I
- Issued
- May 8, 2012
- Abate by
- May 15, 2012
- Penalty
- Initial $1,600 · Current $640 Reduced
General-duty citation text
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l): 29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) The employer did not ensure that the operators of the Sky Track all terrain forklift were evaluated and competent to operate the powered industrial trucks. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $640
- — Z (S) $1600
1926.451 E01
- Issued
- May 8, 2012
- Abate by
- May 9, 2012
- Penalty
- Initial $2,000 · Current $800 Reduced
General-duty citation text
29 CFR 1926.451(e)(1): Portable ladder, hook-on ladder, attachable ladder, stair tower, stairway-type ladder, ramp, runway, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface was not used to access scaffold platforms more than 2 feet above or below a point of access: a) Employees were exposed to fall hazards while accessing scaffold platforms by climbing frames which were not designed for climbing. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $800
- — Z (S) $2000
1926.451 G01
- Issued
- May 8, 2012
- Abate by
- May 9, 2012
- Penalty
- Initial $2,800 · Current $1,120 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level: a) Employees working from frame scaffolding were exposed to fall hazards of greater than 20 feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $1120
- — Z (S) $2800
1926.501 B01
- Issued
- May 8, 2012
- Abate by
- May 9, 2012
- Penalty
- Initial $2,800 · Current $1,120 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) Employees were exposed to fall hazards of approximately 15 feet while working at the unprotected edge of the second floor deck. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $1120
- — Z (S) $2800
More inspections at Liprus U Masonry, INC.
View Liprus U Masonry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 333886851.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.