Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LIPRUS U MASONRY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LIPRUS U MASONRY, INC. in 530 W. DICKENS AVE., CHICAGO, IL 60614 (NAICS 238140). OSHA activity number 343950655.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Liprus U Masonry, INC. — free Get an email when a new federal OSHA severe-injury report for Liprus U Masonry, INC. is published. One employer, no account, unsubscribe in one click.
Site address
530 W. DICKENS AVE.
City
CHICAGO
State
IL
ZIP
60614
Mailing
1814 N. PARK DR., MOUNT PROSPECT, IL 60056
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.451 G01

Serious Gravity 10 1 instance 1 exposed
Issued
May 30, 2019
Abate by
Jun 5, 2019
Penalty
Initial $3,978 · Current $2,513 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level.    a)  On April 22, 2019, employees were exposed to the hazard of falling approximately 25 feet to the ground, while performing masonry work from tubular welded frame scaffold platforms.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2512.5
  • — Z (S) $3978

1926.501 B13

Serious Gravity 10 2 instances 2 exposed
Issued
May 30, 2019
Abate by
Jun 5, 2019
Penalty
Initial $3,978 · Current $2,513 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):    a)  On April 22, 2019, employees engaged in masonry work were not protected from fall hazards while working at an elevation of approximately 11 feet above the ground.    b)  On April 22, 2019, employees were exposed to the hazard of falling approximately 11 feet to the lower level while using a ramp to access and egress the building.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $2512.5
  • — Z (S) $3978

1926.701 B

Serious Gravity 5 1 instance 1 exposed
Issued
May 30, 2019
Abate by
Jun 5, 2019
Penalty
Initial $2,842 · Current $1,775 Reduced
29 CFR 1926.701(b):  All protruding reinforcing steel, onto and/or into which employees could fall or come against, was not guarded to eliminate the hazard of impalement:      a) On April 22, 2019, employees performing masonry work were exposed to the hazard of impalement due to reinforcing steel being unprotected.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1775
  • — Z (S) $2842

1910.178 L06

Other-than-serious 1 instance 1 exposed
Issued
May 30, 2019
Abate by
Jul 2, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.602(d) NOTE: The requirements applicable to construction work under this section are identical to those set forth at 29 CFR 1910.178(l) of this chapter.     29 CFR 1910.178(l)(6):  The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l), with certification records that includes the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation:     a) On or about April 22, 2019, the employer did not certify that each forklift operator had been trained and evaluated as required by paragraph (l) with certification records.     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Liprus U Masonry, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343950655.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.