Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FINAL COAT PAINTING

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of FINAL COAT PAINTING in 3901 N BELT HIGHWAY, SAINT JOSEPH, MO 64505 (NAICS 238320). OSHA activity number 334214863.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Final Coat Painting — free Get an email when a new federal OSHA severe-injury report for Final Coat Painting is published. One employer, no account, unsubscribe in one click.
Establishment
FINAL COAT PAINTING
Site address
3901 N BELT HIGHWAY
City
SAINT JOSEPH
State
MO
ZIP
64505
Mailing
3185 TERMINAL DRIVE, EAGAN, MN 55121
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238320
Employees
80
Ownership type
A

3 citations on file for this inspection.

1926.453 B02 IX

Deleted Serious Gravity 1 1 instance 2 exposed
Issued
Jun 12, 2012
Penalty
Initial $1,607 · Current $0 Reduced
29 CFR 1926.453(b)(2)(ix):     Articulating boom and extensible boom platforms, primarily designed as personnel carriers, shall have both platform (upper) and lower controls. Upper controls shall be in or beside the platform within easy reach of the operator. Lower controls shall provide for overriding the upper controls. Controls shall be plainly marked as to their function. Lower level controls shall not be operated unless permission has been obtained from the employee in the lift, except in case of emergency.    On May 1, 2012 at the jobsite located at 3901 N Belt Highway, employees were exposed to a caught in hazard in that the controls for the aerial lift they were operating were painted over and not clearly marked.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1606.5

1926.501 B01

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Jun 12, 2012
Penalty
Initial $4,410 · Current $0 Reduced
29 CFR 1926.501(b)(1):     "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.    On May 1, 2012, at the jobsite located at 3901 N Belt Highway in St. Joseph, MO employees were exposed to a fall hazard in that they were working on a surface approximately 12 feet above ground level without an approved form of fall protection.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4410

1926.502 D21

Other-than-serious 4 instances 4 exposed
Issued
Jun 12, 2012
Penalty
Initial $1,607 · Current $1,125 Reduced
29 CFR 1926.502(d)(21):     Personal fall arrest systems shall be inspected prior to each use for wear, damage and other deterioration, and defective components shall be removed from service.    On May 1, 2012 at the jobsite located at 3901 N Belt Highway in St. Joseph MO employees were exposed to a fall hazard in that lanyards and harnesses they were using were damaged  and had not been inspected or taken out of service.
Recent events (2)
  • — I (O) $1124.55
  • — Z (S) $1606.5

View Final Coat Painting's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334214863.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.