PELHAM, NY —
OSHA Inspection: FAIRWAY MARKET
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FAIRWAY MARKET in 847 PELHAM PARKWAY, PELHAM, NY 10803 (NAICS 445110). OSHA activity number 334504537.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FAIRWAY MARKET
- Site address
- 847 PELHAM PARKWAY
- City
- PELHAM
- State
- NY
- ZIP
- 10803
- Mailing
- 847 PELHAM PARKWAY, PELHAM, NY 10803
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 445110
- Employees
- 200
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.22 D01
- Issued
- Sep 8, 2012
- Abate by
- Oct 5, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): In every building or other structure, or part thereof, used for mercantile, business, industrial, or storage purposes, the loads approved by the building official were not marked in a conspicuous place in each space to which they related: On or about 5/30/12 Location: Starage Area, 847 Pelham Parkway, Pelham, NY 10803 a) Employee bathrooms were framed out in a corner of the open storage area. The bathrooms had a flat roof/ceiling. There was no sign indicating the maximum load that could be placed on the ceiling/roof. Numerous boxes and other materials were being stored on the roof/ceiling.
Recent events (2)
- — I (S) $1800
- — Z (S) $3000
1910.26 C02 VII
- Issued
- Sep 8, 2012
- Penalty
- Initial $4,000 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.26(c)(2)(vii): Ladders having defects were not marked and taken out of service until repaired: On or about 5/30/12 Location: Storage Area, 847 Pelham Parkway, Pelham, NY 10803 a) A rolling 10 foot metal stair ladder tower was missing both its non skid feet and the left side handrail was broken. It was not marked and removed from service.
Recent events (2)
- — I (S) $2400
- — Z (S) $4000
1910.212 A01
- Issued
- Sep 8, 2012
- Penalty
- Initial $7,000 · Current $4,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation: On or about 5/30/12 Location: Loading Dock, 847 Pelham Parkway, Pelham, NY 10803 a) The safety gate was removed and the safety interlock not functioning on the waste chute of the roll off trash compactor.
Recent events (2)
- — I (S) $4200
- — Z (S) $7000
1910.101 B
- Issued
- Sep 8, 2012
- Penalty
- Initial $4,000 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.101(b): "Compressed gases." The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in Sec. 1910.6. On or about 5/30/12 Location: Loading Dock, 847 Pelham Parkway, Pelham, NY 10803 a) A Oxygen "T" cylinder not in use was stored uncapped and unsecured.
Recent events (2)
- — I (S) $2400
- — Z (S) $4000
1910.215 B09
- Issued
- Sep 8, 2012
- Abate by
- Oct 5, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about 05/30/12 Location: Maintenance Shop, 847 Pelham Parkway, Pelham NY 10803 a) The right tongue guard was missing on the Dayton model 2LKR5 6" abrasive wheel grinder.
Recent events (2)
- — I (S) $1800
- — Z (S) $3000
1910.303 F
- Issued
- Sep 8, 2012
- Abate by
- Oct 5, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.303(f): Each service, feeder and branch circuit, at its disconnecting means or over current device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: On or about 5/30/12 Location: a) Kitchen, 847 Pelham Parkway, Pelham, NY 10803 a) A 110 volt circuit breaker panel did not have the individual breakers labled to indicate their purpose.
Recent events (2)
- — I (S) $1800
- — Z (S) $3000
1910.303 G01 I
- Issued
- Sep 8, 2012
- Abate by
- Oct 5, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(i): Work space was less than 30 inches wide in front of electric equipment operating at 600 volts, nominal, or less: On or about 5/30/12 Location: Kitchen, 847 Pelham Parkway, Pelham, NY 10803 a) Two 110 volt circut breaker panels did not have the required 30 inches of clearence, they were blocked by a large stainless steel food prep table.
Recent events (2)
- — I (S) $1800
- — Z (S) $3000
More inspections at Fairway Market
View Fairway Market's full OSHA safety record →
More inspections in this industry (NAICS 445110)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334504537.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.