AVON, NY —
OSHA Inspection: D. P. TOOL & MACHINE INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of D. P. TOOL & MACHINE INC in 5638 TEC DRIVE, AVON, NY 14414 (NAICS 332710). OSHA activity number 334516572.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D. P. TOOL & MACHINE INC
- Site address
- 5638 TEC DRIVE
- City
- AVON
- State
- NY
- ZIP
- 14414
- Mailing
- 5638 TEC DRIVE, AVON, NY 14414
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 98
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C06 II
- Issued
- Jul 16, 2012
- Abate by
- Aug 15, 2012
- Penalty
- Initial $2,975 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a) On or about 05/31/12, in the establishment, Employer did not certify at least annually that periodic inspections of their Lockout/tagout(LOTO) procedures were performed for machines such as, but not limited to: CNC Machines, Horizontal and Vertical Saws, and Presses. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $2975
1910.151 C
- Issued
- Jul 16, 2012
- Abate by
- Aug 15, 2012
- Penalty
- Initial $2,380 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) On or about 05/31/12, in the battery charging area, there was not an emergency eye wash/shower immediately available for employees refilling water on forklift trucks' batteries. These batteries contained corrosive acid. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1000
- — Z (S) $2380
1910.212 A01
- Issued
- Jul 16, 2012
- Abate by
- Aug 15, 2012
- Penalty
- Initial $2,975 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by the saw blades: a) On or about 05/31/12, in the production areas, DoAll Horizontal Band Saws #1,#2 and #3 did not have guards to protect the non-working part of the blades. b) On or about 05/31/12, in the production areas, Grob Inc Vertical Band Saw did not have a guard to protect the non-working part of the blade under the table. c) On or about 05/31/12, in the production areas, A Hyd Mech Horizontal Band Saw did not have safety interlocks on doors/guards to protect operators changing saw's blade. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2000
- — Z (S) $2975
More inspections at D. P. Tool & Machine INC
View D. P. Tool & Machine INC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334516572.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.