Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: KL CARR ENTERPRISES

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of KL CARR ENTERPRISES in MARIANAS PUBLIC LAND TRUST OFFICE RENOVATION CAPITOL HILL ROAD, CAPITOL HILL, SAIPAN, MP 96950 (NAICS 236220). OSHA activity number 334673829.

Watch KL Carr Enterprises — free Get an email when a new federal OSHA severe-injury report for KL Carr Enterprises is published. One employer, no account, unsubscribe in one click.
Establishment
KL CARR ENTERPRISES
Site address
MARIANAS PUBLIC LAND TRUST OFFICE RENOVATION CAPITOL HILL ROAD, CAPITOL HILL
City
SAIPAN
State
MP
ZIP
96950
Mailing
PO BOX 502534 SAN ROQUE, SAIPAN, MP 96950
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
15
Ownership type
A

3 citations on file for this inspection.

1926.307 D01

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $1020.00 · Current $1020.00
29 CFR 1926.307(d)(1): Pulleys, any parts of which are 7 feet (2.128 m) or less from the floor or working platform, were not guarded in accordance with the standards specified in paragraphs (m) and (o) of this section:     (a) Near the south side exterior of the building on or about June 14, 2012, and at times prior thereto, the table saw motor's  inch V belt and pulley were not guarded on a Delta 10 Contractor's Saw Series 2000. The top of the pulley was 27.5 inches from the ground.
Recent events (1)
  • — Z (S) $1020

1926.307 E03 I

Serious Gravity 1 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.307(e)(3)(i): Vertical and inclined belts were not enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section:    (a) Near the south side exterior of the building on or about June 14, 2012, and at times prior thereto, the table saw motor's  inch V belt and pulley were not guarded on a Delta 10 Contractor's Saw Series 2000. The top of the pulley was 27.5 inches from the ground.
Recent events (1)
  • — Z (S) $0

1926.95 A

Other-than-serious 2 instances 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.95(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, were not provided, used, and maintained in a sanitary and reliable condition wherever it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact:    (a) At the front side of the building on or about June 14, 2012, eye protection was not worn while painting overhead with a roller.  The paint was Dura Craft Exterior Acrylic Latex, # 6503-52156.  The warning label on the container said in the event of eye contact to flush eyes with large amounts of water and to get medical attention.  The MSDS states to wear safety spectacles with unperforated side shields.    (b) Near the south side of the building on or about June 14, 2012, gloves were not worn when a trowel was used to level concrete for the rainwater catch basin pad.  The concrete contained Portland cement.
Recent events (1)
  • — Z (O) $0

View KL CARR ENTERPRISES's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334673829.