DADE CITY, FL —
OSHA Inspection: ROBERTS VAULT COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ROBERTS VAULT COMPANY, INC. in 14621 ROBERTS BARN RD, DADE CITY, FL 33523 (NAICS 327390). OSHA activity number 335199006.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROBERTS VAULT COMPANY, INC.
- Site address
- 14621 ROBERTS BARN RD
- City
- DADE CITY
- State
- FL
- ZIP
- 33523
- Mailing
- 14621 ROBERTS BARN RD, DADE CITY, FL 33523
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 30
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.133 A01
- Issued
- Sep 13, 2012
- Abate by
- Sep 26, 2012
- Penalty
- Initial $2,100 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) Pour Room - Employees pouring and troweling cement in the preparation of manufacturing concrete vaults were not using protective eyewear or gloves, on or about, 07/12/12.
Recent events (2)
- — I (S) $1200
- — Z (S) $2100
1910.138 A
- Issued
- Sep 13, 2012
- Abate by
- Sep 26, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.138(a): The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes. a) Pour Room - Employees pouring and troweling cement in the preparation of manufacturing concrete vaults were not using protective gloves, on or about, 07/12/12.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q01
- Issued
- Sep 13, 2012
- Abate by
- Sep 13, 2012
- Penalty
- Initial $2,800 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel: a) Welding Shop - Hyundai Diesel Forklift - Serial # HN0410137 The forklift was not taken out of service despite a missing seatbelt, on or about, 07/12/12.
Recent events (2)
- — I (S) $1800
- — Z (S) $2800
1910.212 A03 II
- Issued
- Sep 13, 2012
- Abate by
- Sep 26, 2012
- Penalty
- Initial $2,100 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not guarded: a) Welding Shop - Vertical Drill Press Unguarded drill bit on a vertical pedestal drill press, on or about, 07/12/12.
Recent events (2)
- — I (S) $1200
- — Z (S) $2100
1910.212 B
- Issued
- Sep 13, 2012
- Abate by
- Sep 26, 2012
- Penalty
- Initial $2,100 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) Welding Shop - Dayton 8" Pedestal Grinder - Unanchored pedestal grinder, on or about, 07/12/12. b) Welding Shop - Vertical Pedestal Drill Press - Unanchored drill press, on or about, 07/12/12.
Recent events (2)
- — I (S) $1200
- — Z (S) $2100
1910.213 H01
- Issued
- Sep 13, 2012
- Abate by
- Sep 26, 2012
- Penalty
- Initial $3,500 · Current $1,950 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut to give maximum protection possible for the operation being performed: a) Welding Shop - Sears Craftsman 2.5 HP Radial Arm Saw The Radial Arm Saw was not equipped with a lower blade guard, on or about, 07/12/12.
Recent events (2)
- — I (S) $1950
- — Z (S) $3500
1910.213 H04
- Issued
- Sep 13, 2012
- Abate by
- Sep 26, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: a) Welding Shop - Sears Craftsman 2.5 HP Radial Arm Saw The Radial Arm Saw's cutting head failed to return to the starting position when released, on or about, 07/12/12.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Sep 13, 2012
- Abate by
- Oct 26, 2012
- Penalty
- Initial $2,100 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Throughout Workplace Employees were not trained in accordance with the requirements of the standard despite the use of Paint, Cement, Argon, Carbon Dioxide, Oxygen, Diesel Fuel, etc; on or about, 07/12/12.
Recent events (2)
- — I (S) $0
- — Z (S) $2100
1910.23 D01 V
- Issued
- Sep 13, 2012
- Abate by
- Sep 26, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.23(d)(1)(v): On stairways 88 inches wide or more one stair railing was not orovided on each open side. a) Rear Shop Stairway Area Five step stairway missing handrails on all open sides on the stairwayl, on or about, 07/12/12.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.213 S06
- Issued
- Sep 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(s)(6): Cleanliness around working machinery was not maintained to prevent fire hazards and ensure the effective functioning of guards: a) Welding Shop - Radial Saw Area - A heavy presence of sawdust was not cleaned up from under the saw table and from the floor adjacent to the saw following a cutting operation, on or about, 07/12/12.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Roberts Vault Company, INC.
View Roberts Vault Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327390)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335199006.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.