Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DYMAX INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DYMAX INC. in 402 MILLER DR., WAMEGO, KS 66547 (NAICS 333120). OSHA activity number 335286407.

Watch Dymax INC. — free Get an email when a new federal OSHA severe-injury report for Dymax INC. is published. One employer, no account, unsubscribe in one click.
Establishment
DYMAX INC.
Site address
402 MILLER DR.
City
WAMEGO
State
KS
ZIP
66547
Mailing
P.O. BOX 297, WAMEGO, KS 66547
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333120
Employees
43
Ownership type
A

4 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 10 instances 10 exposed
Issued
Nov 15, 2012
Abate by
Dec 12, 2012
Penalty
Initial $2,380 · Current $1,666 Reduced
29 CFR 1910.178(l)(1)(i):   The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l)    At the job site, 402 Miller Drive, Wamego, Kansas, emplyees were operating forklifts without completing formal training and evaluation.   Employees were exposed to struck-by hazards.
Recent events (2)
  • — I (S) $1666
  • — Z (S) $2380

1910.178 P01

Serious Gravity 5 1 instance 10 exposed
Issued
Nov 15, 2012
Abate by
Dec 12, 2012
Penalty
Initial $2,380 · Current $1,666 Reduced
29 CFR 1910.178(p)(1): Where powered industrial trucks were found to be in need of repair, defective, or in any way unsafe, the trucks were not taken out of service until they had been restored to safe operating condition.    At the job site, 402 Miller Drive, Wamego, Kansas, employees were operating the large caterpillar forklift with a horn that did not work.   The forklift was not taken out of service.  Employees were exposed to struck-by hazards.
Recent events (2)
  • — I (S) $1666
  • — Z (S) $2380

1910.184 H05 I

Serious Gravity 5 4 instances 10 exposed
Issued
Nov 15, 2012
Abate by
Dec 12, 2012
Penalty
Initial $2,380 · Current $1,666 Reduced
29 CFR 1910.184(h)(5)(i):  Natural or synthetic fiber rope sling(s) with abnormal wear were not immediately removed from service:    At the job site, 402 Miller Drive, Wamego, Kansas, employees in the fabrication/welding department were using synthetic slings  that were frayed, discolored, and cut.  Employees exposed to struck-by hazards from defective slings.
Recent events (2)
  • — I (S) $1666
  • — Z (S) $2380

1910.243 C03

Serious Gravity 5 5 instances 5 exposed
Issued
Nov 15, 2012
Abate by
Dec 12, 2012
Penalty
Initial $2,380 · Current $1,666 Reduced
29 CFR 1910.243(c)(3):   Vertical portable grinders. Safety guards used on machines known as right angle head or vertical portable grinders shall have a maximum exposure angle of 180 deg., and the guard shall be so located so as to be between the operator and the wheel during use. Adjustment of guard shall be such that pieces of an accidentally broken wheel will be deflected away from the operator.     At the job site,  402 Miller Dr. Wamego, Kansas, employees were operating hand held grinders without the wheel guard in place.   Employees were exposed to struck-by and cut injuries.
Recent events (2)
  • — I (S) $1666
  • — Z (S) $2380

View Dymax INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335286407.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.