RED LION, PA — 2012-08-17 00:00:00

OSHA Inspection: KEYSTONE CONSTRUCTION

Complaint inspection · Safety discipline

At a glance

On 2012-08-17 00:00:00, OSHA opened a complaint safety inspection of KEYSTONE CONSTRUCTION in 302 DEER PATH DRIVE, RED LION, PA 17356 (NAICS 238130). OSHA activity number 335868998.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Keystone Construction — free Get an email when a new federal OSHA severe-injury report for Keystone Construction is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: KEYSTONE CONSTRUCTION
Site address: 302 DEER PATH DRIVE
City: RED LION
State: PA
ZIP: 17356
Mailing: 230 BUSHONG ROAD, LEOLA, PA 17540

What kind of inspection was it?

Inspection type: Complaint (B)
Scope: Complete (A)
Discipline: Safety
Advance notice: No
Union status: B

When did the case open and close?

Opened: 2012-08-17 00:00:00
Closing conference: 2012-08-17 00:00:00
Case closed: 2012-09-28 00:00:00
Last modified: 2026-07-21 00:00:00
Data loaded: 2026-07-22 00:19:52

Establishment context

NAICS code: 238130
Employees: 3
Ownership type: A

Citations

5 citations on file for this inspection.

1926.451 A06

Serious Gravity 5 1 instance 1 exposed

Issued: Sep 5, 2012
Abate by: Sep 26, 2012
Penalty: Initial $1,600 · Current $880 Reduced

General-duty citation text

29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person and were not constructed and loaded in accordance with that design.    (a) 302 Deer Path Drive - On or about August 17, 2012 employees were working from a supported scaffold platform which was damaged and the width exceeded the wheelbase of the Pettibone 8044 forklift supporting it.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (2)

2012-09-18 00:00:00 — I (S) $880
2012-09-05 00:00:00 — Z (S) $1600

1926.451 C02 V

Serious Gravity 5 1 instance 1 exposed

Issued: Sep 5, 2012
Abate by: Sep 26, 2012
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1926.451(c)(2)(v): The employer used forklifts  to support scaffold platforms without ensuring that the entire platform was attached to the fork and that the forklift was not moved horizontally while the platform was occupied:    (a) 302 Deer Path Drive - On or about August 17, 2012 an employee was working from a wooden scaffold platform which was not attached to the forks of the Pettibone 8044 forklift supporting it.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (2)

2012-09-18 00:00:00 — I (S) $0
2012-09-05 00:00:00 — Z (S) $0

1926.451 G01 VII

Serious Gravity 5 1 instance 1 exposed

Issued: Sep 5, 2012
Abate by: Sep 26, 2012
Penalty: Initial $0 · Current $0

General-duty citation text

29 CFR 1926.451(g)(1)(vii): For all scaffolds not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, each employee was not protected by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section:    (a) 302 Deer Path Drive - On or about August 17, 2012 an employee was working from a scaffold platform fastening Tyvek wrap and was not protected from falling approximately 13 feet to grade.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (2)

2012-09-18 00:00:00 — I (S) $0
2012-09-05 00:00:00 — Z (S) $0

1926.602 C01 VI

Serious Gravity 10 1 instance 1 exposed

Issued: Sep 5, 2012
Abate by: Sep 26, 2012
Penalty: Initial $2,800 · Current $1,540 Reduced

General-duty citation text

29 CFR 1926.602(c)(1)(vi): All industrial trucks in use shall meet the applicable requirements of design, construction, stability, inspection, testing, maintenance, and operation, as defined in American National Standards Institute B56.1-1969, Safety Standards for Powered Industrial Trucks; a safety platform firmly secured to the lifting carriage and or forks was not used:    (a) 302 Deer Path Drive - On or about August 17, 2012 an employee was elevated and worked from the forks of a Pettibone 8044 rough terrain forklift to install wood sheathing and was not protected from falling approximately 16 to 18 feet to grade.     Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.

Recent events (2)

2012-09-18 00:00:00 — I (S) $1540
2012-09-05 00:00:00 — Z (S) $2800

1926.602 D

Serious Gravity 1 1 instance 1 exposed

Issued: Sep 5, 2012
Abate by: Sep 26, 2012
Penalty: Initial $1,200 · Current $660 Reduced

General-duty citation text

29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by 1910.178(l):    (a) 302 Deer Path Drive - On or about August 17, 2012 an employee was authorized to operate a Pettibone 8044 rough terrain forklift on site and the employee had not recieved training in the operation of the forklift.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.

Recent events (2)

2012-09-18 00:00:00 — I (S) $660
2012-09-05 00:00:00 — Z (S) $1200

More inspections at Keystone Construction

Sep 19, 2018 KALAMAZOO, MI Apr 17, 2014 EAST PETERSBURG, PA Apr 11, 2013 INDIANAPOLIS, IN Jul 27, 2011 KENT, WA Jun 3, 2011 LANCASTER, PA

View Keystone Construction's full OSHA safety record →

More inspections in this industry (NAICS 238130)

Jul 17, 2026 M and F Construction LLC · MOUNT JULIET, TN Jul 17, 2026 Carrillo Construction LLC · MERIDIAN, ID Jul 17, 2026 Sevy Brothers Construction LLC · MERIDIAN, ID Jul 17, 2026 M&M Construction Services Corp · WESTFORD, MA Jul 16, 2026 Francisco Arias · FAIRHOPE, AL

More inspections in PA

Jul 17, 2026 FOX Tapping INC. · COLUMBIA, PA Jul 17, 2026 Columbia Water CO · COLUMBIA, PA Jul 17, 2026 NEW Enterprise Stone & Lime CO., INC. · WILKES BARRE, PA Jul 16, 2026 Mukhleen Gernaros Pizza LLC DBA Genaro'S Pizzeria and Steaks · PHILADELPHIA, PA Jul 16, 2026 Center City Construction and Development, LLC · PHILADELPHIA, PA

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335868998.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.