DELAND, FL —
OSHA Inspection: IDEAL DEALS, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of IDEAL DEALS, LLC in 2000 BRUNSWICK LANE, DELAND, FL 32724 (NAICS 444190). OSHA activity number 335967014.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IDEAL DEALS, LLC
- Site address
- 2000 BRUNSWICK LANE
- City
- DELAND
- State
- FL
- ZIP
- 32724
- Mailing
- 2000 BRUNSWICK LANE, DELAND, FL 32724
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 444190
- Employees
- 42
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 6, 2012
- Abate by
- Sep 27, 2012
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section: a. On or about August 16, 2012, throughout the plant, procedures were not developed and utilized for employees engaged in activities such as but not limited to; servicing and performing maintenance activities.
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
1910.147 C07 I
- Issued
- Sep 6, 2012
- Abate by
- Sep 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program was understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by employees: a. On or about August 16, 2012, employees were not trained in lockout/tagout procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Sep 6, 2012
- Abate by
- Sep 27, 2012
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. On or about August 16, 2012, in the fabrication shop, the 55 ton Edward iron worker did not have a guard to prevent employees from having any part of their body in the danger zone during the operating cycle.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.217 C01 I
- Issued
- Sep 6, 2012
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es): a. On or about August 16, 2012, in the assembly prep area, the mechanical Roussell Punch Press did not have a guard, exposing employees to an amputation hazard.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.217 D04
- Issued
- Sep 6, 2012
- Abate by
- Sep 27, 2012
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.217(d)(4): Guide post hazard. The hazard created by a guide post (when it is located in the immediate vicinity of the operator) when separated from its bushing by more than one-fourth inch was a point of operation hazard and was not protected in accordance with paragraph (c) of this section: a. On or about August 16, 2012, in the fabrication area, all three rail punch presses were not guarded to protect against the hazard, created by the guide post.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.37 A03
- Issued
- Sep 6, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: a. On or about August 16, 2012, in the fabrication/storage area, the exit door had materials stored outside that obstructed the way of the exit.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G01 II
- Issued
- Sep 6, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: a. On or about August 16, 2012, in the fabrication area, the working space about electrical equipment was used for storage.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Ideal Deals, LLC
View Ideal Deals, LLC's full OSHA safety record →
More inspections in this industry (NAICS 444190)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335967014.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.