BEATRICE, NE —
OSHA Inspection: FURMANITE AMERICA, INC.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of FURMANITE AMERICA, INC. in 21178 SW 89TH ROAD, BEATRICE, NE 68310 (NAICS 237990). OSHA activity number 335980983.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FURMANITE AMERICA, INC.
- Site address
- 21178 SW 89TH ROAD
- City
- BEATRICE
- State
- NE
- ZIP
- 68310
- Mailing
- 10370 RICHMOND AVENUE SUITE 600, HOUSTON, TX 77042
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237990
- Employees
- 815
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.119 H03 I
- Issued
- Jan 22, 2013
- Abate by
- Mar 11, 2013
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.119(h)(3)(i): The contract employer did not ensure that each contract employee was trained in the work practices necessary to safely perform his/her job: 21178 SW 89th Rd., Beatrice, NE 68310 (Jobsite): The employer did not ensure that each contract employee was trained in the work practices necessary to safely perform their job. On August 17, 2012, one (1) contract employee was hospitalized after a mechanical plug installed on the High Temperature Shift suddenly came out as an employee was releasing the bolts and struck the employee. The vessel was not checked by the employee for pressure prior to attempting to release the mechanical plug. Abatement certification and abatement documentation is required for this violation. The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful. The abatement certification sheet is enclosed.
Recent events (3)
- — J (S) $0
- — C (S) $7000
- — Z (S) $7000
1910.119 H03 III
- Issued
- Jan 22, 2013
- Abate by
- Mar 11, 2013
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.119(h)(3)(iii): The contract employer did not document that each contract employee has received and understood the training provided by this paragraph: 21178 SW 89th Rd., Beatrice, NE 68310 (Jobsite): The employer did not have a record prepared which contained the identity of the contract employee, the date of training, and the means used to verify that the employee understood the training in regard to removal of a mechanical plug. On August 17, 2012, one (1) contract employee was hospitalized after a mechanical plug installed on the High Temperature Shift suddenly came out as an employee was releasing the bolts and struck the employee. The vessel was not checked by the employee for pressure prior to attempting to release the mechanical plug. Abatement certification and abatement documentation is required for this violation. The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful. The abatement certification sheet is enclosed.
Recent events (3)
- — J (S) $0
- — C (S) $7000
- — Z (S) $7000
1910.119 H03 IV
- Issued
- Jan 22, 2013
- Abate by
- Mar 11, 2013
- Penalty
- Initial $7,000 · Current $6,300 Reduced
General-duty citation text
29 CFR 1910.119(h)(3)(iv): The contract employer did not assure that each contract employee followed the safety rules of the facility including the safe work practices required by paragraph (f)(4) of this section: 21178 SW 89th Rd., Beatrice, NE 68310 (Jobsite): The contract employer did not assure that a contract employee filled out a safe work permit as required by the contracting employer prior to removing a mechanical plug. On August 17, 2012, one (1) contract employee was hospitalized after a mechanical plug installed on the High Temperature Shift suddenly came out as an employee was releasing the bolts and struck the employee. The vessel was not checked by the employee for pressure prior to attempting to release the mechanical plug. Abatement certification and abatement documentation is required for this violation. The documentation should include written verification of abatement, applicable measurements or monitoring results, and photographs or videos which you believe will be helpful. The abatement certification sheet is enclosed.
Recent events (3)
- — J (S) $6300
- — C (S) $7000
- — Z (S) $7000
More inspections at Furmanite America, INC.
View Furmanite America, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 237990)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335980983.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.