CLEWISTON, FL —
OSHA Inspection: D & J MACHINERY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of D & J MACHINERY, INC. in 728 E. TRINIDAD AVE., CLEWISTON, FL 33440 (NAICS 332710). OSHA activity number 336287982.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D & J MACHINERY, INC.
- Site address
- 728 E. TRINIDAD AVE.
- City
- CLEWISTON
- State
- FL
- ZIP
- 33440
- Mailing
- 728 E. TRINIDAD AVE., CLEWISTON, FL 33440
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 37
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 E01
- Issued
- Sep 26, 2012
- Abate by
- Oct 18, 2012
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.23(e)(1): Standard railing(s) did not consist of top rail, intermediate rail and/or posts and/or did not have a vertical height of 42 inches (106.7 cm) nominal from upper surface of top rail to floor, platform runway, or ramp level: On or about 9/12/2012, at the second floor of the machine shop, the employer did not have a mid-rail for the guardrail.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.215 A04
- Issued
- Sep 26, 2012
- Abate by
- Oct 3, 2012
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about 9/12/2012, the work rest was at a distance of 1/4 of an inch from the periphery of the grinding wheel.
Recent events (2)
- — I (S) $1071
- — Z (S) $1785
1910.215 B09
- Issued
- Sep 26, 2012
- Abate by
- Oct 3, 2012
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about 9/12/2012, the bench grinder in the machine shop had a distance of 1 and 7/16 inch from the tongue guard to the periphery of the wheel.
Recent events (2)
- — I (S) $1071
- — Z (S) $1785
1910.253 B04 III
- Issued
- Sep 26, 2012
- Abate by
- Oct 3, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least 1/2 hour: On or about 9/12/2012, the employer stored oxygen cylinders at a distance of 9 feet from the acetylene cylinders.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at D & J Machinery, INC.
View D & J Machinery, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336287982.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.