PRATT, KS —
OSHA Inspection: KANZA COOPERATIVE ASSOCIATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of KANZA COOPERATIVE ASSOCIATION in 100 MAPLE ST, PRATT, KS 67124 (NAICS 311119). OSHA activity number 336644984.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KANZA COOPERATIVE ASSOCIATION
- Site address
- 100 MAPLE ST
- City
- PRATT
- State
- KS
- ZIP
- 67124
- Mailing
- P.O. BOX 175, IUKA, KS 67066
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311119
- Employees
- 7
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.132 A
- Issued
- Dec 27, 2012
- Abate by
- Jan 24, 2013
- Penalty
- Initial $5,940 · Current $2,995 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: Employees working in the feed mill were exposed to thermal hazards in that the employees working next to the pellet mill were exposed to the 190 degree steam pipe.
Recent events (2)
- — I (S) $2995
- — Z (S) $5940
1910.219 D01
- Issued
- Dec 27, 2012
- Abate by
- Jan 24, 2013
- Penalty
- Initial $4,950 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Employees working in the feed mill were exposed to amputation hazards in that the backside of the pulley guards were guarded for the following locations: a) Pulley guard for the drive pulleys for pellet mill cooling fan in the basement of the feed mill. b) Pulley guard for the drive pulleys for the receiving pit conveyor in the basement of the feed mill.
Recent events (2)
- — I (S) $2450
- — Z (S) $4950
1910.219 E01 I
- Issued
- Dec 27, 2012
- Abate by
- Jan 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): Employees working in the feed mill were exposed to amputation hazards in that the backside of the blet guards were guarded for the following locations: a) Belt guard for the drive belts for pellet mill cooling fan in the basement of the feed mill. b) Belt guard for the drive belts for the receiving pit conveyor in the basement of the feed mill.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.272 Q03
- Issued
- Dec 27, 2012
- Abate by
- Feb 14, 2013
- Penalty
- Initial $4,950 · Current $0 Reduced
General-duty citation text
29 CFR 1910.272(q)(3): All bucket elevators were not equipped with a means of access to the boot section with a means of access for clean-out of the boot and for inspection of the boot, pulley, and belt: Employees working in the grain elevator were exposed to fire and explosion hazards in that the boot of the bucket elevator leg did not have an inspection door to check belt alignment and for clean out.
Recent events (2)
- — I (S) $0
- — Z (S) $4950
More inspections at Kanza Cooperative Association
View Kanza Cooperative Association's full OSHA safety record →
More inspections in this industry (NAICS 311119)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336644984.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.