WEST POINT, NE —
OSHA Inspection: GRAIN STATES SOYA, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GRAIN STATES SOYA, INC. in 400 JOHNSON RD., WEST POINT, NE 68788 (NAICS 311224). OSHA activity number 336715594.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GRAIN STATES SOYA, INC.
- Site address
- 400 JOHNSON RD.
- City
- WEST POINT
- State
- NE
- ZIP
- 68788
- Mailing
- P.O. BOX 157, WEST POINT, NE 68788
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311224
- Employees
- 20
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.213 A12
- Issued
- Jan 2, 2013
- Abate by
- Jan 31, 2013
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.213(a)(12): The portion of circular saw(s) beneath or behind the table, where there was a possibility of contact with the saw, was not covered with a guard or exhaust hood: Storage area in the facility The employer is failing to protect employees from amputation hazards. The portion of the blade underneath the table saw was not properly guarded to prevent employees from coming in contact with the moving saw blade.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.215 B09
- Issued
- Jan 2, 2013
- Abate by
- Jan 31, 2013
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Storage area in the facility The employer is failing to ensure that the tongue guard of the bench grinder is properly adjusted to protect employees from laceration hazards. The guard in question was not present on the grinder.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.219 D01
- Issued
- Jan 2, 2013
- Abate by
- Jan 31, 2013
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Storage area of the facility The employer is failing to ensure that the drive pulley on the table saw in this area is properly guarded to prevent employees from coming in contact with the in-running nip point of the belt and pulley system. This machinery was not fully guarded to protect employees from potential amputation hazards.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.219 E01 I
- Issued
- Jan 2, 2013
- Abate by
- Jan 31, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: Storage area of the facility The employer is failing to ensure that the belts on a table saw in this area is properly guarded to prevent employees from coming in contact with the in-running nip point of the belt and pulley system. This machinery was not fully guarded to protect employees from potential amputation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Grain States Soya, INC.
View Grain States Soya, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311224)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336715594.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.