CARTERSVILLE, GA —
OSHA Inspection: A & D CONTRACTING & MACHINE SHOP, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of A & D CONTRACTING & MACHINE SHOP, INC. in 61 WEST FELTON ROAD, CARTERSVILLE, GA 30120 (NAICS 332710). OSHA activity number 336966189.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A & D CONTRACTING & MACHINE SHOP, INC.
- Site address
- 61 WEST FELTON ROAD
- City
- CARTERSVILLE
- State
- GA
- ZIP
- 30120
- Mailing
- 61 WEST FELTON ROAD, CARTERSVILLE, GA 30120
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
Citation 01001
- Issued
- Nov 9, 2012
- Abate by
- Dec 31, 2012
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a) Front shop - The employer did not ensure that the junction box that connects power from the front shop to the back shop had a cover on it, exposing employee(s) to electrical shock hazards.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.305 G02 III
- Issued
- Nov 9, 2012
- Abate by
- Dec 31, 2012
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: (a) Front shop - The employer did not ensure that a flexible cord connected to a belt sander in the front shop was properly connected, exposing employee(s) to electrical shock hazards
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.1200 E01
- Issued
- Nov 9, 2012
- Abate by
- Feb 13, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program which at included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): (a) Entire area - The employer did not ensure that a written hazard communication program was implemented exposing employee(s) to hazards such as struck-by, caught-in and fire from propane tanks.
Recent events (2)
- — I (S) $600
- — Z (S) $1200
1910.132 D02
- Issued
- Nov 9, 2012
- Abate by
- Feb 13, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2): (a) Throughout site - The employer did not ensure that a written hazard assessment was documented exposing employees to possible hazzards such as: struck-by, caught-in and, fire hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L04 III
- Issued
- Nov 9, 2012
- Abate by
- Dec 31, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operators performance was not conducted at least once every 3 years (a) Throughout site - The employer did not ensure that employee(s) had forklift refresher training in the past three years, exposing employees to possible struck-by and crush-by hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at A & D Contracting & Machine Shop, INC.
View A & D Contracting & Machine Shop, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336966189.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.