ELMA, NY —
OSHA Inspection: K.T. CONSTRUCTION SERVICES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of K.T. CONSTRUCTION SERVICES, INC. in MOOG INC. CORPORATE HEADQUARTERS BUILDING SENECA & JAMISON ROADS, ELMA, NY 14059 (NAICS 238310). OSHA activity number 337000186.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- K.T. CONSTRUCTION SERVICES, INC.
- Site address
- MOOG INC. CORPORATE HEADQUARTERS BUILDING SENECA & JAMISON ROADS
- City
- ELMA
- State
- NY
- ZIP
- 14059
- Mailing
- 733 DELAWARE ROAD, #128, TONAWANDA, NY 14223
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238310
- Employees
- 15
- Ownership type
- A
Citations
2 citations on file for this inspection.
1926.404 A02
- Issued
- Nov 5, 2012
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.404(a)(2): A grounded conductor was attached to a terminal or lead so as to reverse designated polarity: a) On or about 10/16/12, at the Moog Inc. Corporate Headquarters Construction Site, Elma, NY: Employees of one contractor used a DeWalt Compound Mitre Saw to cut metal parts. Employees of another contractor used flourescent light fixtures to provide lighting in an elevator shaft and to power other equipment. The Mitre Saw and flourescent light fixtures were connected to 120 volt-ac power via a series of extension cords, the first of which was plugged into a receptacle in a 4-receptacle outlet box mounted on a wooden 2x4 in the lower level main office area inside the building. The first cord in the series was a short black GFCI 3-Way. All 3 receptacles on this cord had "reversed polarity". This defective cord was marked with a magic marker as "Jacks", and belonged to K.T. Construction Services, Inc. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $2800
- — Z (S) $2800
1926.404 F06
- Issued
- Nov 5, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) On or about 10/16/12, at the Moog Inc. Corporate Headquarters Construction Site, Elma, NY: Employees of one contractor used a DeWalt Compound Mitre Saw to cut metal parts. Employees of another contractor used flourescent light fixtures to provide lighting in an elevator shaft and to power other equipment. The Mitre Saw and flourescent light fixtures were connected to 120 volt-ac power via a series of extension cords, the first of which was plugged into a receptacle in a 4-receptacle outlet box mounted on a wooden 2x4 in the lower level main office area inside the building. The first cord in the series was a short black GFCI 3-Way. All 3 receptacles on this cord were "ungrounded" because the grounding prong was missing on the plug of this cord. This defective cord was marked with a magic marker as "Jacks", and belonged to K.T. Construction Services, Inc. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
More inspections at K.T. Construction Services, INC.
View K.T. Construction Services, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238310)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337000186.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.