Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: QUALITY ROOFING & SHEET METAL, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of QUALITY ROOFING & SHEET METAL, INC. in 1170 BULLTAIL ROAD, BELGRADE, MT 59714 (NAICS 236115). OSHA activity number 337155238.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quality Roofing & Sheet Metal, INC. — free Get an email when a new federal OSHA severe-injury report for Quality Roofing & Sheet Metal, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1170 BULLTAIL ROAD
City
BELGRADE
State
MT
ZIP
59714
Mailing
490 COBB HILL ROAD, BOZEMAN, MT 59718
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236115
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 4 exposed
Issued
Nov 1, 2012
Abate by
Nov 29, 2012
Penalty
Initial $1,600 · Current $800 Reduced
1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:      (a) Construction Site: On or about October 31, 2012, and at times prior thereto, employees were exposed to overhead hazards while working below roof construction without overhead protection.
Recent events (2)
  • — I (S) $800
  • — Z (S) $1600

1926.501 B13

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 1, 2012
Abate by
Nov 29, 2012
Penalty
Initial $2,000 · Current $1,000 Reduced
1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net system, or personal fall arrest system:      (a) Construction Site: On or about October 31, 2012, and at times prior thereto, employees were exposed to a fall of approximately thirteen feet to the ground below while installing roofing felt paper.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1926.503 A01

Deleted Serious Gravity 5 1 instance 4 exposed
Issued
Nov 1, 2012
Abate by
Nov 29, 2012
Penalty
Initial $2,000 · Current $0 Reduced
1926.503(a)(1): The employer did not provide an effective training program for each employee who was  exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards:      (a) Construction Site: On or about October 31, 2012, and at times prior thereto, employees were exposed to a fall of approximately thirteen feet to the ground below due to lack of adequate training in the recognition of fall hazards and the means to control these hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

1926.1053 B05 I

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 1, 2012
Abate by
Nov 29, 2012
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladders were not used at an angle such than the horizontal distance from the top support to the foot of the ladder way approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support):      (a) Construction Site: On or about October 31, 2012, and at times prior thereto, employees were exposed to a fall of approximately thirteen feet to the ground below while using a fourteen foot non-self-supporting ladder set up at an excessive angle to gain access to the roof of the garage. The base was set up seven feet away from the supporting wall.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1926.1060 A

Other-than-serious 1 instance 4 exposed
Issued
Nov 1, 2012
Abate by
Nov 29, 2012
Penalty
Initial $2,000 · Current $0 Reduced
1926.1060(a): The employer did not provide an adequate training program for each employee using ladders and stairways, as necessary:      (a) Construction Site: On or about October 31, 2012, and at times prior thereto, employees were exposed to a fall of approximately thirteen feet to the ground below due to lack of adequate training in the recognition of fall hazards related to ladders, and the means to control these hazards.
Recent events (2)
  • — I (O) $0
  • — Z (S) $2000

View Quality Roofing & Sheet Metal, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337155238.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.