SYRACUSE, NY —
OSHA Inspection: M R COMMERCIAL MAINTENANCE
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of M R COMMERCIAL MAINTENANCE in 131 ALLIANCE BANK PARKWAY, SYRACUSE, NY 13208 (NAICS 238120). OSHA activity number 337354617.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- M R COMMERCIAL MAINTENANCE
- Site address
- 131 ALLIANCE BANK PARKWAY
- City
- SYRACUSE
- State
- NY
- ZIP
- 13208
- Mailing
- 2526 JORDANVILLE ROAD, JORDANVILLE, NY 13361
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238120
- Employees
- 5
- Ownership type
- A
Citations
7 citations on file for this inspection.
1903.19 C01
- Issued
- Mar 6, 2013
- Abate by
- Mar 25, 2013
- Penalty
- Initial $440 · Current $440
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated. a) At the facility, on or about 2/19/13: The employer did not provide abatement certification for Citation 1, Items 1a, 1b, 2a, 2b, 3a and 3b within 10 calendar days after the abatement date. Abatement certification must be submitted for this item.
Recent events (1)
- — Z (O) $440
1926.451 B01
- Issued
- Dec 12, 2012
- Abate by
- Dec 24, 2012
- Penalty
- Initial $1,760 · Current $1,760
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii): a) On or about 11/14/2012, In front of the Syracuse Regional Transportation Center: Employees were standing on two separate work platforms that were 28 inches wide and 18 inches wide, which were supported by two separate tubular welded frame scaffold towers. Abatement certification is required for this item.
Recent events (1)
- — Z (S) $1760
1926.451 G01
- Issued
- Dec 12, 2012
- Abate by
- Dec 24, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: a) On or about 11/14/2012, In front of the Syracuse Regional Transportation Center: Employees were standing on two separate work platforms that were at a height of twelve feet eight inches above the ground. There was no fall protection in place or use. Abatement certification is required for this item.
Recent events (1)
- — Z (S) $0
1926.451 E01
- Issued
- Dec 12, 2012
- Abate by
- Dec 24, 2012
- Penalty
- Initial $1,760 · Current $1,760
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface shall be used. Cross braces shall not be used as a means of access. a) On or about 11/14/2012, In front of the Syracuse Regional Transportation Center: Employees were climbing the end frames of the scaffolding to access the tubular welded frame scaffold work platforms. Abatement certification is required for this item.
Recent events (1)
- — Z (S) $1760
1926.454 A
- Issued
- Dec 12, 2012
- Abate by
- Jan 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) On or about 11/14/2012, In front of the Syracuse Regional Transportation Center: Employees erecting and using tubular welded frame scaffolding were not provided with training regarding the hazards associated with scaffolding. Abatement certification is required for this item.
Recent events (1)
- — Z (S) $0
1926.501 B01
- Issued
- Dec 12, 2012
- Abate by
- Dec 24, 2012
- Penalty
- Initial $2,200 · Current $2,200
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) On or about 11/14/2012, In front of the Syracuse Regional Transportation Center: Employees were walking and working on the top of a metal canopy system, no fall protection was in use. Abatement certification is required for this item.
Recent events (1)
- — Z (S) $2200
1926.503 A01
- Issued
- Dec 12, 2012
- Abate by
- Jan 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) On or about 11/14/2012, In front of the Syracuse Regional Transportation Center: Employees were exposed to fall hazards while walking and working on the top of a metal canopy system. Employees were not provided with any fall protection training. Abatement certification is required for this item.
Recent events (1)
- — Z (S) $0
More inspections at M R Commercial Maintenance
View M R Commercial Maintenance's full OSHA safety record →
More inspections in this industry (NAICS 238120)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337354617.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.