Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CONART PRECAST, LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CONART PRECAST, LLC in 3782 US-280 EAST, COBB, GA 31735 (NAICS 327390). OSHA activity number 337398416.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Conart Precast, LLC — free Get an email when a new federal OSHA severe-injury report for Conart Precast, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
CONART PRECAST, LLC
Site address
3782 US-280 EAST
City
COBB
State
GA
ZIP
31735
Mailing
3782 US-280 EAST, COBB, GA 31735
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327390
Employees
50
Ownership type
A

4 citations on file for this inspection.

1910.132 F01

Serious Gravity 5 2 instances 9 exposed
Issued
Feb 6, 2013
Abate by
Mar 5, 2013
Penalty
Initial $2,975 · Current $1,785 Reduced
29 CFR 1910.132(f)(1):     The employer shall provide training to each employee who is required by this section to use PPE. Each such employee shall be trained to know at least the following: When PPE is necessary; What PPE is necessary; How to properly don, doff, adjust, and wear PPE; The limitations of the PPE; and, The proper care, maintenance, useful life and disposal of the PPE.    a) In the dry packing area, on or about and at times prior to November 15, 2012, the employer did not provide for training on the requirements of personal protective equipment for employees who directly worked with a wet sand and concrete mixture during the production process, exposing employees to the hazards associated with dry, cracked skin and dermal injuries.    b) In the dry packing area, on or about and at times prior to November 15, 2012, the employer did not provide for training on the requirements of personal protective equipment for employees who operated air powered hammers during the compacting phase of production, exposing employees to the hazards associated with eye irritation.    ABATEMENT CERTIFICATION IS REQUIRED.
Recent events (2)
  • — I (S) $1785
  • — Z (S) $2975

1910.133 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Feb 6, 2013
Abate by
Mar 5, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.133(a)(1):     The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.    a) In the dry packing area, on or about and at times prior to November 15, 2012, the employer did not provide for appropriate eye protection for employees who operated an air hammer during the compacting phase of production, exposing employees to the hazards associated with eye injury.    ABATEMENT CERTIFICAION IS REQUIRED.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.138 A

Serious Gravity 5 1 instance 9 exposed
Issued
Feb 6, 2013
Abate by
Mar 5, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.138(a):     General requirements. Employers shall select and require employees to use appropriate hand protection when employees' hands are exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasions; punctures; chemical burns; thermal burns; and harmful temperature extremes.    a) In the dry packing area, on or about and at times prior to November 15, 2012, the employer did not provide the proper gloves for employees working with a three to one mix of sand and concrete, exposing employees to the hazards associated with dry, cracked skin and dermal injuries.    ABATEMENT CERTIFICATION IS REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Other-than-serious 1 instance 9 exposed
Issued
Feb 6, 2013
Abate by
Mar 5, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1):     Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and material safety data sheets.    a) In the dry packing area, on or about and at times prior to November 15, 2012, the employer did not ensure employees were effectively trained in the hazards associated with the use of concrete used in the process, exposing employees to the hazards associated with dry, cracked skin, and dermal irritation.    ABATEMENT CERTIFICATION IS REQUIRED
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Conart Precast, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337398416.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.