MUSKOGEE, OK —
OSHA Inspection: OWENS-BROCKWAY GLASS CONTAINER INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of OWENS-BROCKWAY GLASS CONTAINER INC. in 2401 OLD SHAWNEE ROAD, MUSKOGEE, OK 74401 (NAICS 327213). OSHA activity number 337448419.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OWENS-BROCKWAY GLASS CONTAINER INC.
- Site address
- 2401 OLD SHAWNEE ROAD
- City
- MUSKOGEE
- State
- OK
- ZIP
- 74401
- Mailing
- 2401 OLD SHAWNEE ROAD, MUSKOGEE, OK 74402
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327213
- Employees
- 223
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 21, 2013
- Abate by
- Apr 5, 2013
- Penalty
- Initial $7,000 · Current $4,200 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a.On or about 10/13/2012, B-3 Forming Machine Platform, Energy control procedures were not utilized for changing the Servo shear spray bar which exposes employees to energy sources that include but are not limited to kinetic, pneumatic, and thermal energy sources. b.On or about 10/13/2012, B-3 Forming Machine Platform, Energy control procedures were not utilized for the Servo gob distributor when clearing glass from troughs which exposes employees to energy sources that include but are not limited to kinetic and thermal energy sources.
Recent events (2)
- — I (S) $4200
- — Z (S) $7000
1910.147 C06 I
- Issued
- Feb 21, 2013
- Abate by
- Apr 5, 2013
- Penalty
- Initial $7,000 · Current $4,200 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a.On or about 11/16/2012, B-3 Forming Machine Platform, Periodic inspection of the energy control procedure for the Servo shear were not conducted at least annually which exposes employees to energy sources that include but are not limited to kinetic, pneumatic, and thermal energy sources. b.On or about 11/16/2012, B-3 Forming Machine Platform, Periodic inspection of the energy control procedure for the Servo gob distributor were not conducted at least annually which exposes employees to energy sources that include but are not limited to kinetic and thermal energy sources.
Recent events (2)
- — I (S) $4200
- — Z (S) $7000
1910.147 C07 I
- Issued
- Feb 21, 2013
- Abate by
- Apr 5, 2013
- Penalty
- Initial $4,675 · Current $2,800 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a. On or about 11/16/2012, B-3 Forming Machine Platform, Authorized lockout tagout training was not provided to upkeeps who perform maintenance and servicing on the Servo bottle forming machine line which exposes employees to energy sources that include but are not limited to kinetic, pneumatic, and thermal.
Recent events (2)
- — I (S) $2800
- — Z (S) $4675
1910.147 C05 II B
- Issued
- Feb 21, 2013
- Abate by
- Apr 5, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(ii)(B): Lockout and tagout devices were not standardized within the facility in at least one of the following criteria: color; shape; or size: a. On or about 11/16/2012, B-3 Forming Machine Platform, Lockout tagout locks were not standardized in that they included silver metal body and colored plastic body locks for maintenance and servicing work on bottle forming machines which exposes employees to energy sources that include but are not limited to kinetic, pneumatic, and thermal.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Owens-Brockway Glass Container INC.
View Owens-Brockway Glass Container INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327213)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337448419.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.