SOUTH BELOIT, IL —
OSHA Inspection: JAMCO PRODUCTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of JAMCO PRODUCTS, INC. in ONE JAMCO CT., SOUTH BELOIT, IL 61080 (NAICS 339999). OSHA activity number 337498414.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JAMCO PRODUCTS, INC.
- Site address
- ONE JAMCO CT.
- City
- SOUTH BELOIT
- State
- IL
- ZIP
- 61080
- Mailing
- ONE JAMCO CT., SOUTH BELOIT, IL 61080
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339999
- Employees
- 75
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.212 A03 II
- Issued
- Feb 22, 2013
- Abate by
- Mar 29, 2013
- Penalty
- Initial $4,200 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): The point of operation was not adequately guarded as the operators could place their hands, fingers, into the point of operation while it was running. a. Cabinets building: Hans Schroeder Folding Machine, Serial No. 320044, the point of operation was not adequately guarded, and an employee could reach into the point of operation during the operation of the machine. b. Cabinets Building, Hans Schroeder Folding Machine, Serial No. 320084, the point of operation was not adequately guarded. c. Cart Building, Fasti Folding Machine, Serial #07FP40009, the point of operation was not adequately guarded. d. Stainless Building, RAS Folding Machine, Serial #1751, the point of operation was not adequately guarded. e. Cabinets Building, Bettenbender press brake, serial #68997, the point of operation was not guarded. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (3)
- — F (S) $1500
- — C (S) $4200
- — Z (S) $4200
1910.217 B07 V A
- Issued
- Feb 22, 2013
- Abate by
- Mar 4, 2013
- Penalty
- Initial $3,500 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.217(b)(7)(v)(a): Each two-hand control for single stroke operations on mechanical power press(es) using part revolution clutches was not arranged by design, construction and/or separation so that the concurrent use of both hands was required: Cabinets Building - On the Walsh 20 ton mechanical power press, Latch Rod, the controls were not separated so that the use of both hands was required. The controls were approximately 15 inches apart and an employee could use their elbow and fingers of one hand to activate the press. Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (3)
- — F (S) $3000
- — C (S) $3500
- — Z (S) $3500
More inspections at Jamco Products, INC.
View Jamco Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339999)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337498414.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.