GAINESVILLE, GA —
OSHA Inspection: METALWORKS, LLC
Follow-up inspection · Health discipline
At a glance
On , OSHA opened a follow-up health inspection of METALWORKS, LLC in 2545 MONROE DR, GAINESVILLE, GA 30507 (NAICS 332323). OSHA activity number 337571426.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- METALWORKS, LLC
- Site address
- 2545 MONROE DR
- City
- GAINESVILLE
- State
- GA
- ZIP
- 30507
- Mailing
- 2545 MONROE DR. SUITE E, GAINESVILLE, GA 30507
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332323
- Employees
- 15
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.23 C01
- Issued
- Mar 18, 2013
- Abate by
- May 2, 2013
- Penalty
- Initial $1,760 · Current $1,056 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: a) Production area: The storage area above the main office, which is 10 feet 4 inches above the ground level, was not guarded on all open sides to prevent employees from falling, on or about 11/7/12.
Recent events (2)
- — I (S) $1056
- — Z (S) $1760
1910.219 E03 I
- Issued
- Mar 18, 2013
- Abate by
- Apr 11, 2013
- Penalty
- Initial $3,520 · Current $2,112 Reduced
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o) (a) Employees in the production area were exposed to ingoing nip points hazards while operating the Clip Machine with no guarding of the belt and pulley system on or about 11/01/12. METALWORKS, LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.219(e)(3)(i) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 315739425, CITATION NUMBER 01, ITEM NUMBER 7, ISSUED ON FEBRUARY 2, 2012. THE CITATIONS BECAME A FINAL ORDER ON FEBRUARY 27, 2012.
Recent events (2)
- — I (O) $2112
- — Z (R) $3520
1910.95 K02
- Issued
- Mar 18, 2013
- Abate by
- May 2, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.95(k)(2): The training program was not repeated annually for each employee included in the hearing conservation program: a)MetalWorks, LLC.-Shop Area-An employee using the stamp press to make deck clips was exposed to noise levels of 88.3 dBA, exceeding the action level of 85 dBA. Noise training had not been conducted on or about 2/1/2013. b)MetalWorks, LLC.-Shop Area-An employee using the stamp press to make deck clips was exposed to noise levels of 87.5 dBA, exceeding the action level of 85 dBA. Noise training had not been conducted on or about 2/1/2013
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Metalworks, LLC
View Metalworks, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332323)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337571426.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.