WELLS, ME —
OSHA Inspection: MASTER CONSTRUCTION
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of MASTER CONSTRUCTION in ROUTE 1, WELLS, ME 04090 (NAICS 238170). OSHA activity number 337694228.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MASTER CONSTRUCTION
- Site address
- ROUTE 1
- City
- WELLS
- State
- ME
- ZIP
- 04090
- Mailing
- 45 PARIS STREET, EVERETT, MA 02149
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 2
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.304 F
- Issued
- Dec 7, 2012
- Abate by
- Dec 19, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed ripsaws were not guarded by an automatically adjusting hood which completely encloses that portion of the saw above the table and above the material being cut: At the Jobsite - The 8 inch Dewalt tablesaw was not provided with a hood guard.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1926.304 F
- Issued
- Dec 7, 2012
- Abate by
- Dec 19, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws were not equipped with a spreader to prevent material from squeezing the saw or being thrown back on the operator: At the Jobsite - The 8 inch JDewalt tablesaw was not provided with a spreader.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.304 F
- Issued
- Dec 7, 2012
- Abate by
- Dec 19, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: At the Jobsite - The 8 inch Dewalt tablesaw was not provided with non-kickback fingers
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.304 F
- Issued
- Dec 7, 2012
- Abate by
- Dec 19, 2012
- Penalty
- Initial $2,400 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.304(f): Section 5.1.3.3 American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Electrically driven equipment was not controlled with magnetic switches or other devices that would prevent automatic restarting of the machine after a power failure: At the Jobsite - The electrically driven 8 inch Dewalt table saw was not provided with anti-restart protection.
Recent events (2)
- — I (S) $1200
- — Z (S) $2400
1926.453 B02 V
- Issued
- Dec 7, 2012
- Abate by
- Dec 13, 2012
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift: At the Jobsite - The employees working in the aerial lift were not tied off with belt or harness and lanyard.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1926.1053 B01
- Issued
- Dec 7, 2012
- Abate by
- Dec 13, 2012
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access: At the Jobsite - The ladder did not extend 3 feet above the landing surface.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
More inspections at Master Construction
View Master Construction's full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337694228.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.