GREEN BAY, WI —
OSHA Inspection: GREEN BAY DRESSED BEEF, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GREEN BAY DRESSED BEEF, LLC in 544 ACME STREET, GREEN BAY, WI 54302 (NAICS 311611). OSHA activity number 337772214.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GREEN BAY DRESSED BEEF, LLC
- Site address
- 544 ACME STREET
- City
- GREEN BAY
- State
- WI
- ZIP
- 54302
- Mailing
- P.O. BOX 8547, GREEN BAY, WI 54308
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311611
- Employees
- 1115
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.133 A01
- Issued
- Mar 21, 2013
- Abate by
- Apr 23, 2013
- Penalty
- Initial $3,740 · Current $0 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) Maintenance employee was wearing prescription glasses that did not comply with ANSI Z87.1-1989 or 2003 for eye protection. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $3740
1910.147 F04
- Issued
- Mar 21, 2013
- Abate by
- Apr 23, 2013
- Penalty
- Initial $4,675 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(f)(4): During shift or personnel changes, specific procedures were not utilized to ensure the continuity of lockout or tagout protection, including provision for the orderly transfer of lockout or tagout devices between off-going and oncoming employees: a) Employees who were authorized to lockout band saws were not maintaining lockout between shifts, as outlined in the company's lockout/tagout standard and policy. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $4675
1910.212 A01
- Issued
- Mar 21, 2013
- Abate by
- Apr 25, 2013
- Penalty
- Initial $5,610 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Fabrication line employees were exposed to a hazard of their fingers being caught in a plastic conveyor belt. b) Lower band saw guards were not replaced following lockout procedures. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (S) $3000
- — Z (S) $5610
1910.244 A01 II
- Issued
- Mar 21, 2013
- Abate by
- Apr 23, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.244(a)(1)(ii): Rated load(s) of portable jack(s) were not legibly and permanently marked in a prominent location on the jack(s) by casting, stamping, or other suitable means: a) The hydraulic jack used to lift/lower a wash machine unit out of Hoof wash machine approximately twice a year, was not marked. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.244 A02 II
- Issued
- Mar 21, 2013
- Abate by
- Apr 23, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.244(a)(2)(ii): The operator does not watch the stop indicator, which shall be kept clean, in order to determine the limit of travel. The indicated limit shall not be overrun: a) The hydraulic jack used to lift/lower a wash machine unit out of Hoof wash machine approximately twice a year, did not have a stop indicator. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.244 A02 VI A
- Issued
- Mar 21, 2013
- Abate by
- Apr 23, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.244(a)(2)(vi)(a): Each jack used constantly or intermittently at a single locality was not thoroughly inspected at least once every six months: a) Hydraulic jack used to lift/lower a unit out of Hoof wash machine approximately twice a year, was not being inspected. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.244 A02 VIII
- Issued
- Mar 21, 2013
- Abate by
- Apr 23, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.244(a)(2)(viii): Jacks which were out of order were not tagged accordingly and/or were used before repairs were made: a) Hydraulic jack used to lift/lower a unit out of Hoof wash machine approximately twice a year, was not tagged for repair when it was damaged. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Green BAY Dressed Beef, LLC
View Green BAY Dressed Beef, LLC's full OSHA safety record →
More inspections in this industry (NAICS 311611)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337772214.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.