LAKE BARRINGTON, IL —
OSHA Inspection: ULTIMATE MOLD FINISHING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ULTIMATE MOLD FINISHING, INC. in 22N029 PEPPER RD., LAKE BARRINGTON, IL 60010 (NAICS 333511). OSHA activity number 338067010.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ULTIMATE MOLD FINISHING, INC.
- Site address
- 22N029 PEPPER RD.
- City
- LAKE BARRINGTON
- State
- IL
- ZIP
- 60010
- Mailing
- 22N029 PEPPER RD. UNIT #6, LAKE BARRINGTON, IL 60010
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333511
- Employees
- 5
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Jan 16, 2013
- Abate by
- Feb 20, 2013
- Penalty
- Initial $1,600 · Current $1,120 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) Facility Wide - The employer did not ensure that each powered industrial truck operator was competent to operate the Toyota fork lift truck safety, as demonstrated by the successful completeion of the training and evaluation.
Recent events (2)
- — I (S) $1120
- — Z (S) $1600
1910.215 A04
- Issued
- Jan 16, 2013
- Penalty
- Initial $1,020 · Current $714 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): The employer did not ensure that work rest(s) on grinding machinery were adjusted closely to the wheel with a maximum opening of one eighth inch: (a) Shop Area - Work rest(s) on the Performax 8 inch bench grinder were not adjusted closely to the wheel with a maximum opening of one eight inch.
Recent events (2)
- — I (S) $714
- — Z (S) $1020
1910.215 B09
- Issued
- Jan 16, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The employer did not ensure that the distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top did not exceed one fourth inch: (a) Shop area - The Performax 8 inch bench grinder had a distance between the abrasive wheel periphery and the tongue end of the safety guard that exceeded one fourth inch.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Jan 16, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $1,200 · Current $840 Reduced
General-duty citation text
29 CFR 1910.242(b):The employer did not ensure that compressed air used for cleaning purposes was reduced to less than 30 p.s.i.: (a) Shop area - Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.
Recent events (2)
- — I (S) $840
- — Z (S) $1200
1910.184 D
- Issued
- Jan 16, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(d):The employer did not ensure that each day before being used, the sling and all fastenings and attachments were being inspected for damage or defects by a competent person designated by the employer: (a) Shop area - Each day before being used, the sling and all fastenings and attachments were not being inspected for damage or defects by a competent person.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 B02
- Issued
- Jan 16, 2013
- Abate by
- Feb 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): The employer did not ensure that listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling: (a) Shop Area - The electrical power strip used to supply power equipment including but not limited to the Performax 8 inch bench grinder was not used in accordance with it's listing or labeling electrical equipment.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Ultimate Mold Finishing, INC.
View Ultimate Mold Finishing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333511)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338067010.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.