Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ULTIMATE MOLD FINISHING, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of ULTIMATE MOLD FINISHING, INC. in 22N029 PEPPER RD., LAKE BARRINGTON, IL 60010 (NAICS 332813). OSHA activity number 338087414.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ultimate Mold Finishing, INC. — free Get an email when a new federal OSHA severe-injury report for Ultimate Mold Finishing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
22N029 PEPPER RD.
City
LAKE BARRINGTON
State
IL
ZIP
60010
Mailing
22N029 PEPPER RD. UNIT #6, LAKE BARRINGTON, IL 60010
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332813
Employees
5
Ownership type
A

5 citations on file for this inspection.

1910.1200 E01

Serious Gravity 5 1 instance 5 exposed
Issued
Feb 28, 2013
Abate by
Apr 15, 2013
Penalty
Initial $1,600 · Current $880 Reduced

Hazardous substances 9760

29 CFR 1910.1200(e)(1):     The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    a) Ultimate Mold Finishing Inc. did not develop or implement a written hazard communication program in accordance with 29 CFR 1910.1200(e)(1) that would describe or include at least the following:    1) Requirement for labeling of containers of hazardous chemicals;  2) Material safety data sheet availability;  3) Training of employees;  4) A complete list of hazardous chemicals known to be in the workplace;  5) Methods to inform employees of the hazards on non-routine tasks; and  6) Methods to inform other employer(s) of material safety data sheet availability; the labeling system; and any precautionary measures to protect employees.    Employees were exposed to hazardous chemicals, including carbon monoxide, denatured alcohol and mineral spirits.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $880
  • — Z (S) $1600

1910.1200 G08

Serious Gravity 5 1 instance 5 exposed
Issued
Feb 28, 2013
Abate by
Apr 15, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):     The employer did not ensure that material safety data sheets were readily accessible to the employees in their work area during each work shift:    a)  Ultimate Mold Finishing Inc. did not maintain, or make available, Material Safety data sheets to its employees.  Employees were exposed to hazardous chemicals including, but not limited to: denatured alcohol and mineral spirits.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 5 1 instance 5 exposed
Issued
Feb 28, 2013
Abate by
Apr 22, 2013
Penalty
Initial $0 · Current $0

Hazardous substances 9760

29 CFR 1910.1200(h)(1):     Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a)  Ultimate Mold Finishing Inc. did not provide its employees with effective training on the health and physical hazards of the chemicals used in the workplace.  Employees are exposed to hazardous chemicals including, but not limited to: denatured alcohol and mineral spirits.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 F05 I

Serious Gravity 5 1 instance 5 exposed
Issued
Feb 28, 2013
Abate by
Mar 26, 2013
Penalty
Initial $1,600 · Current $880 Reduced

Hazardous substances 9760

29 CFR 1910.1200(f)(5)(i):     The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein:    (a) Ultimate Mold Finishing Inc. did not ensure that secondary chemical containers were labeled with the identity of the hazardous chemical contained within.  Denatured alcohol was being transported from a 55 gallon drum to the workstations and kept in a container that was labeled for mineral spirits.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $880
  • — Z (S) $1600

1910.1200 F05 II

Serious Gravity 5 1 instance 5 exposed
Issued
Feb 28, 2013
Abate by
Mar 26, 2013
Penalty
Initial $0 · Current $0

Hazardous substances 9760

29 CFR 1910.1200(f)(5)(ii):     The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings:    (a) Ultimate Mold Finishing Inc. did not ensure that each container of hazardous chemicals were labeled with appropriate hazard warnings.  Denatured alcohol was transported from a 55 gallon drum to the workstations and stored in a bottle that was labeled with the hazard warnings for mineral spirits.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Ultimate Mold Finishing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338087414.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.