Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ATI ALLEGHENY LUDLUM

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ATI ALLEGHENY LUDLUM in 1357 EAST RODNEY FRENCH BOULEVARD, NEW BEDFORD, MA 02744 (NAICS 331221). OSHA activity number 338176423.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ATI Allegheny Ludlum — free Get an email when a new federal OSHA severe-injury report for ATI Allegheny Ludlum is published. One employer, no account, unsubscribe in one click.
Site address
1357 EAST RODNEY FRENCH BOULEVARD
City
NEW BEDFORD
State
MA
ZIP
02744
Mailing
1357 EAST RODNEY FRENCH BOULEVARD, NEW BEDFORD, MA 02744
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331221
Employees
103
Ownership type
A

4 citations on file for this inspection.

1910.23 C01

Other-than-serious 1 instance 4 exposed
Issued
Jan 29, 2013
Abate by
Mar 20, 2013
Penalty
Initial $4,000 · Current $2,500 Reduced
29 CFR 1910.23(c)(1):     Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:Note:  Toeboards are only required when persons can pass, there is moving equipment or there is equipment with which falling materials could create a hazard.    Furnace 5, Second Mezzanine:                A standard rail was not provided at floor opening at the bridle 3 rolls.
Recent events (2)
  • — I (O) $2500
  • — Z (S) $4000

1910.212 A01

Serious Gravity 5 3 instances 6 exposed
Issued
Jan 29, 2013
Abate by
Mar 20, 2013
Penalty
Initial $5,000 · Current $2,500 Reduced
29 CFR 1910.212(a)(1):     One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    Maintenance Dept.:    1)         The unused section of the right side of the blade of the Doall Horizontal Metal Cutting Bandsaw was not guarded and the guard for the unused section of the blade for the left side of the blade was damaged.    2)           The chuck keys for the six lathes were not spring loaded.    Furnace 5 Mezzanine:              A pinchpoint at the bridle 3 rolls was not guarded.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $5000

1910.213 B03

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 29, 2013
Abate by
Mar 20, 2013
Penalty
Initial $5,000 · Current $2,500 Reduced
29 CFR 1910.213(b)(3):     Provisions were not made to prevent woodworking machine(s) from automatically restarting upon restoration of power after power failure:    Shipping Area:              The radial arm saw was not equipped with a magnetic motor starter.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $5000

1910.213 H04

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 29, 2013
Abate by
Mar 18, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.213(h)(4):     Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator:    Shipping Dept.:           The cutting head of the radial arm saw did not return to its starting position when released by the operator.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View ATI Allegheny Ludlum's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338176423.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.