Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MAC INDUSTRIES, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MAC INDUSTRIES, INC. in 7054 COUNTY RD 4730, POMONA, MO 65789 (NAICS 321920). OSHA activity number 338343445.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MAC Industries, INC. — free Get an email when a new federal OSHA severe-injury report for MAC Industries, INC. is published. One employer, no account, unsubscribe in one click.
Site address
7054 COUNTY RD 4730
City
POMONA
State
MO
ZIP
65789
Mailing
P.O. BOX 1041, WEST PLAINS, MO 65775
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321920
Employees
20
Ownership type
A

4 citations on file for this inspection.

1910.23 C01

Serious Gravity 5 1 instance 17 exposed
Issued
Mar 5, 2013
Abate by
Apr 2, 2013
Penalty
Initial $2,400 · Current $1,680 Reduced
29 CFR 1910.23(c)(1):     Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:    (a) Pallet production area, outside owners second floor office; Guardrails around the walkway/platform were not standard in that there was no midrail and the top rail was approximately eight inches too low.    Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2400

1910.132 D01

Serious Gravity 5 1 instance 17 exposed
Issued
Mar 5, 2013
Abate by
Apr 2, 2013
Penalty
Initial $2,400 · Current $1,680 Reduced

Hazardous substances 811081118130

29 CFR 1910.132(d)(1):     The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):     (a) Noise levels were not evaluated to determine employee exposure and the necessity for hearing protection in the manual pallet build and Viking automatic pallet production areas.     Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2400

1910.178 Q01

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 5, 2013
Abate by
Apr 2, 2013
Penalty
Initial $2,000 · Current $1,400 Reduced
29 CFR 1910.178(q)(1):     Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel:    (a) Forklifts, such as but not limited to the HELI H2000 Series 25, Model CPCD25, SN 01025B2127 forklift, were not taken out of service when not in safe operating condition. The HELI did not have operational back-up lights and horn and was not taken out of service for repairs.    Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM.  FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2000

1910.305 G01 IV A

Serious Gravity 5 1 instance 6 exposed
Issued
Mar 5, 2013
Abate by
Mar 25, 2013
Penalty
Initial $1,600 · Current $1,120 Reduced
29 CFR 1910.305(g)(1)(iv)(A):     Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    (a) Pallet Production Area; Flexible cords were used in lieu of fixed wiring to power the high pressure sodium lights over the Viking pallet building machines and over the manual pallet building stations. Flexible cords could be damaged over time and fire hazards could develop.    Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (2)
  • — I (S) $1120
  • — Z (S) $1600

View MAC Industries, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338343445.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.