PEWAUKEE, WI —
OSHA Inspection: PRODUCT MINIATURE CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PRODUCT MINIATURE CO., INC. in 627 CAPITOL DRIVE, PEWAUKEE, WI 53072 (NAICS 339950). OSHA activity number 338412638.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PRODUCT MINIATURE CO., INC.
- Site address
- 627 CAPITOL DRIVE
- City
- PEWAUKEE
- State
- WI
- ZIP
- 53072
- Mailing
- 627 CAPITOL DRIVE, PEWAUKEE, WI 53072
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339950
- Employees
- 61
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- May 10, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees (a) Employees were exposed to crushing hazards while working on the Kone 10 ton overhaed crane and the employer did not ensure that cranes were inspected on at least a monthly basis as required by ASME B30.11 - 1998 Monorails and Underhung Cranes.
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
5(a)(1)
- Issued
- May 10, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees (a) Employees were exposed to crushing hazards while working with the Yale hoist and the employer did not ensure that the hoists were inspected on at least a monthly basis as required by ASME B30.16 - 2007 Overhead Hoists (Underhung).
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
1910.212 A01
- Issued
- May 10, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: (a) Employees were exposed to an amputation hazard while working on the Cincinnati (Machine #14) injection mold machine and the employer did not ensure that the area were product exits the machine was not properly guarded.
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
1910.215 A04
- Issued
- May 10, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $1,785 · Current $1,785
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch (a) Employees were using the 6" Westward bench grinder, located behind Cincinnati (Machine #31) injection mold machine, and the employer did not ensure that the work rest was adjusted to a maximum opening of 1/8".
Recent events (2)
- — I (S) $1785
- — Z (S) $1785
1910.215 B09
- Issued
- May 10, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $1,785 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) Employees were using the 6" Westward bench grinder, located behind Cincinnati (Machine #31) injection mold machine, and the employer did not ensure that the tongue guard was adjusted to a maximum opening of 1/4".
Recent events (2)
- — I (S) $0
- — Z (S) $1785
1910.303 B01
- Issued
- May 10, 2013
- Abate by
- Jun 6, 2013
- Penalty
- Initial $1,785 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees: (a) Employees were exposed to electrical hazards while working on the 6'' Westward bench grinder, located behind the large Cincinnati (Machine #31) injection mold machine, and the employer did not ensure that the light on the bench grinder was free from recognized hazards.
Recent events (2)
- — I (S) $1000
- — Z (S) $1785
More inspections at Product Miniature CO., INC.
View Product Miniature CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339950)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338412638.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.