NEVADA, MO —
OSHA Inspection: AMERICAN STANDARD BRANDS
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of AMERICAN STANDARD BRANDS in 1800 NORTH INDUSTRIAL PARKWAY, NEVADA, MO 64772 (NAICS 327111). OSHA activity number 338460249.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch American Standard Brands — free
Get an email when a new federal OSHA severe-injury report for American Standard Brands is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- AMERICAN STANDARD BRANDS
- Site address
- 1800 NORTH INDUSTRIAL PARKWAY
- City
- NEVADA
- State
- MO
- ZIP
- 64772
- Mailing
- 1800 NORTH INDUSTRIAL PARKWAY, NEVADA, MO 64772
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327111
- Employees
- 140
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.1200 F05 I
- Issued
- Apr 25, 2013
- Abate by
- May 20, 2013
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein: (a) In the maintenance shop there was a metal container stored in a shop made metal basket attached to the PowerMatic 1150 Drill Press. The metal container was covered with oily, dirty debris such that the identity of the chemical within the container was completely obscured. Maintenance staff believed the contents to be a thread cutting oil, but there were differing opinions of which thread cutting oil was in the container. The original contets were flammable and toxic according to maintenance staff. The MSDS provided to the CSHO does not match the hazards on the metal container. Actual cutting fluid contained within the metal container is not known to anyone to which the CSHO spoke; they guessed what was in the container. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (S) $5000
1910.1200 F05 II
- Issued
- Apr 25, 2013
- Abate by
- May 20, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings: (a) In the maintenance shop there was a metal container stored in a shop made metal basket attached to the PowerMatic 1150 Drill Press. The metal container was covered with oily, dirty debris such that the listed hazards were mostly obscured and the identity of the chemical within the container was completely obscured. Maintenance staff believed the contents to be a thread cutting oil, but there were differing opinions of which thread cutting oil was in the container. The original contents were flammable and toxic according to the label. The hazards on the MSDS provided to the CSHO do not match the hazards on the metal container. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.134 F02
- Issued
- Apr 25, 2013
- Abate by
- May 20, 2013
- Penalty
- Initial $5,000 · Current $0 Reduced
9010S103Z102
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: (a) Employees required to wear tight fitting respirators, such as but not limited to glaze sprayers and glaze makers, were not fit tested annually. Poor fit due to a change in respirator fit could lead to employee exposure to silica, zinc oxide, quartz, and dust particles. Abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $0
- — Z (S) $5000
1910.134 G01 I A
- Issued
- Apr 25, 2013
- Abate by
- May 20, 2013
- Penalty
- Initial $7,000 · Current $3,500 Reduced
9010S103Z102
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: (a) Employees required to wear tight fitting respirators, such as but not limited to glaze sprayers, were not clean shaven. Poor fit could lead to employee exposure to silica, zinc oxide, quartz, and dust particles. Abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $3500
- — Z (S) $7000
1910.134 H01 I
- Issued
- Apr 25, 2013
- Abate by
- May 20, 2013
- Penalty
- Initial $7,000 · Current $3,500 Reduced
9010S103Z102
General-duty citation text
29 CFR 1910.134(h)(1)(i): Respirators issued for the exclusive use of an employee were not cleaned and disinfected as often as necessary to be maintained in a sanitary condition: (a) A Glaze Sprayer employee's respirator was not cleaned and disinfected as often as necessary to be maintained in a sanitary condition as evidenced by the buildup of dust and dirt inside the respirator. Abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $3500
- — Z (S) $7000
1910.134 H02 I
- Issued
- Apr 25, 2013
- Abate by
- May 20, 2013
- Penalty
- Initial $5,000 · Current $0 Reduced
9010S103Z102
General-duty citation text
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or were not packed or stored to prevent deformation of the facepiece and exhalation valve: (a) A Glaze Sprayer employee's respirator was not stored to protect it from damage, contamination and dust and was not packed or stored to prevent deformation of the facepiece and exhalation valve in that the respiraotr was being stored in a locker without a bag or other appropriate container. Abatement certification is required for this item; use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (O) $0
- — Z (S) $5000
More inspections at American Standard Brands
Aug 10, 2022
SALEM, OH
Nov 10, 2021
SALEM, OH
Sep 14, 2021
SALEM, OH
Jan 23, 2013
NEVADA, MO
Dec 11, 2009
MOORESVILLE, NC
View American Standard Brands's full OSHA safety record →
More inspections in this industry (NAICS 327111)
Oct 18, 2019
110438 - Genesis Molding INC · MISHAWAKA, IN
Aug 2, 2019
110084 - Coast OEM LLC · KOKOMO, IN
Jul 6, 2017
Kohler Company · BROWNWOOD, TX
May 4, 2017
Hansgrohe · ALPHARETTA, GA
Apr 20, 2017
Pivotek, LLC · FAIRFIELD, OH
More inspections in MO
Jul 17, 2026
United Parcel Service · SAINT LOUIS, MO
Jul 15, 2026
Triple J Construction, LLC. · PLATTE CITY, MO
Jul 14, 2026
Torchylo Builders, LLC. · CLINTON, MO
Jul 13, 2026
Jorge Merida · BLUE SPRINGS, MO
Jul 9, 2026
Niagara Bottling · KANSAS CITY, MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338460249.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.