OSHA Inspection: MAGENTA, LLC

Issued

Feb 14, 2013

Abate by

May 18, 2013

Penalty

Initial $4,500 · Current $2,250 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i):The employer did not ensure that procedures were utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    (a) Molding Rooms- Energy control procedures were not utilized for the control of potentially hazardous energy during maintenance of the injection molding machines.

Issued

Feb 14, 2013

Abate by

May 18, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees:    (a) Molding Rooms - The employer did not provide training for the employees performing maintenance of injection molding machines to ensure that the purpose and function of the energy control program is understood.

Issued

Feb 14, 2013

Abate by

May 18, 2013

Penalty

Initial $4,500 · Current $0 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed:    (a) Facility Wide - An annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were being followed was not being completed and certified.

Issued

Feb 14, 2013

Abate by

Mar 13, 2013

Penalty

Initial $3,600 · Current $1,800 Reduced

General-duty citation text

29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of a powered industrial truck were performed by the employer without the manufacturer's prior written approval:    (a) Molding Room/Clean Room- A boom attachment ( serial number B2031) was added to the Yale fork lift truck (serial number N444008) by the employer without the manufacturer's approval.

Issued

Feb 14, 2013

Abate by

Mar 13, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:    (a) Molding Room/ Clean Room - The Yale fork lift truck (serial number N444008) with the boom attachment ( serial number B2031)  was not marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered.

Issued

Feb 14, 2013

Abate by

Mar 13, 2013

Penalty

Initial $3,600 · Current $1,800 Reduced

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:         a) Facility wide - All powered industrial truck operators were not evaluated on the operation of the powered industrial trucks at least once every three years.

Issued

Feb 14, 2013

Abate by

Mar 13, 2013

Penalty

Initial $4,500 · Current $2,250 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, rotating parts and flying chips :    (a) Tool Room - One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area of the Clausing - Colchester 13" lathe from hazards such created by the rotating chuck.     (b) Maintenance Shop - One or more methods of machine guarding was not provided to protect the operator and other employees in the maintenance shop area from the unused portion of the band saw blade on the Roll-In All Purpose Band Saw.

Issued

Feb 14, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage:    (a)  Molding Room/Clean Room - The required working space about a 240 Volt electrical cabinet was used for storage of a storage rack.