Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MAGENTA LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MAGENTA LLC in 15160 NEW AVENUE, LOCKPORT, IL 60441 (NAICS 326199). OSHA activity number 346389471.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Magenta LLC — free Get an email when a new federal OSHA severe-injury report for Magenta LLC is published. One employer, no account, unsubscribe in one click.
Establishment
MAGENTA LLC
Site address
15160 NEW AVENUE
City
LOCKPORT
State
IL
ZIP
60441
Mailing
15160 NEW AVENUE, LOCKPORT, IL 60441
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326199
Employees
95
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 II C

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 2, 2023
Abate by
Feb 22, 2023
Penalty
Initial $10,938 · Current $7,000 Reduced
29 CFR 1910.147(c)(4)(ii)(C): The energy control procedure did not clearly and specifically outline the steps for placement, removal and transfer of lockout devices or tagout devices and the responsibility for them.   a.  Production Area - On or about December 9, 2022, the written energy control program did not adequately include specific step by step procedures to control and lockout all energy sources for employees who may perform service and/or maintenance, to include clearing jams, on the Blistex #7 Labeler, Serial #14648N-A-E11.  Employees were thereby exposed to the hazards associated with unexpected energization of equipment.
Recent events (2)
  • — I (S) $7000
  • — Z (S) $10938

1910.147 C06

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 2, 2023
Abate by
Mar 22, 2023
Penalty
Initial $10,938 · Current $6,000 Reduced
29 CFR 1910.147(c)(6):  The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.    a.  Production Area - On or about December 9, 2022, employees were required to perform service and/or maintenance, to include clearing jams, on the Blistex #7 Labeler,  Serial #14648N-A-E11.  The employer did not conduct a periodic inspection of each energy control procedure at least annually to ensure that the procedure and the requirements of the standard were being followed.
Recent events (2)
  • — I (S) $6000
  • — Z (S) $10938

1910.147 C07 I A

Serious Gravity 10 2 instances 4 exposed
Issued
Feb 2, 2023
Abate by
Feb 22, 2023
Penalty
Initial $10,938 · Current $7,000 Reduced
29 CFR  1910.147(c)(7)(i)(A):  Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation:   a.  Production Area - On or about December 9, 2022, the employer did not provide effective training to authorized employees in the recognition of applicable hazardous energy sources, the type of magnitude of energy available in the workplace, and the methods, devices, and means necessary for energy isolation and control.   Employees were thereby exposed to the hazards associated with unexpected re-energization of equipment.
Recent events (2)
  • — I (S) $7000
  • — Z (S) $10938

1910.147 C07 I B

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 2, 2023
Abate by
Feb 22, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.147(c)(7)(i)(B):  Affected employees were not instructed in the purpose and use of the energy control procedure:  a.  Production Area - On or about December 9, 2022, the employer did not provide effective training to affected employees to include all of the elements in (a) through (c), thereby exposing employees to the hazards associated with unexpected re-energization of equipment.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Magenta LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346389471.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.