Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,193,745Inspections Most recent open 2026-08-06 Last loaded 2026-08-10

OSHA Inspection: ANMOR MACHINING COMPANY LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of ANMOR MACHINING COMPANY LLC in 20 HUDSON PLACE, NEW BRITAIN, CT 06051 (NAICS 332710). OSHA activity number 338832843.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Anmor Machining Company LLC for free Get an email when a new federal OSHA severe-injury report for Anmor Machining Company LLC is published. One employer, no account, unsubscribe in one click.
Site address
20 HUDSON PLACE
City
NEW BRITAIN
State
CT
ZIP
06051
Mailing
20 HUDSON PLACE, NEW BRITAIN, CT 06051
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
12
Ownership type
A

5 citations on file for this inspection.

1910.37 A03

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 19, 2013
Penalty
Initial $1,600 · Current $800 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:   Facility-South Exit Doors: On or about February 13, 2013, the exit discharge through the south facing emergency exit doors was obstructed by exterior snow accumulation while the building was occupied.
Recent events (2)
  • · I (S) $800
  • · Z (S) $1600

1910.37 B02

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 19, 2013
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading Exit:  Emergency Exit Door (South): On or about the February 12, 2013, the EXIT sign was missing from the electric emergency illumination fixture.
Recent events (2)
  • · I (S) $600
  • · Z (S) $1200

1910.101 B

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 19, 2013
Abate by
Jun 6, 2013
Penalty
Initial $1,600 · Current $800 Reduced
29 CFR 1910.101(b):  The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6: Shop Floor: On or about March 1, 2013 , a compressed gas cylinder containing argon was not stored securely to prevent the cylinder from falling. (Ref. CGA P-1-1965 Section 3.3.1 referencing 2006 CGA P-1 Section 5.7.4.)
Recent events (2)
  • · I (S) $800
  • · Z (S) $1600

1910.134 K06

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 19, 2013
Abate by
Jun 6, 2013
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1910.134(k)(6):  The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  Anmor Machining Company, LLC- Shipping and Receiving: On or about March 1, 2013, employees who voluntarily wore Uline dust masks, were not provided information found in Appendix D of 29 CFR 1910.134.
Recent events (2)
  • · I (S) $600
  • · Z (S) $1200

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
Apr 19, 2013
Abate by
Jun 6, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  Anmor Machining Company: On or about February 12, 2013 the employer did not develop and implement a written hazard communication program when employees handled hazardous chemicals such as, but not limited to  Hysol MB 50, a metal working fluid which contained highly-refined mineral-oil.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Anmor Machining Company LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338832843.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.