ATLANTA, GA —
OSHA Inspection: THE CRAFT-ART COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of THE CRAFT-ART COMPANY, INC. in 1209 LOGAN CIRCLE NW, ATLANTA, GA 30318 (NAICS 321999). OSHA activity number 338911126.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE CRAFT-ART COMPANY, INC.
- Site address
- 1209 LOGAN CIRCLE NW
- City
- ATLANTA
- State
- GA
- ZIP
- 30318
- Mailing
- 1209 LOGAN CIRCLE NW, ATLANTA, GA 30318
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 16
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C06 I
- Issued
- May 30, 2013
- Abate by
- Jun 21, 2013
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: a) Facility- The employer did not conduct an annual or frequent inspections of the energy control procedures while performing work on machinery exposing employees to amputation hazards.
Recent events (3)
- — J (O) $0
- — C (S) $2000
- — Z (S) $2000
1910.212 A01
- Issued
- May 30, 2013
- Abate by
- Jun 14, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. a) At the sample area- The employer was using a Craftsman press drill, floor model: 149.213330 with an unguarded chuck, exposing employees to rotating parts hazards.
Recent events (3)
- — J (S) $600
- — C (S) $1200
- — Z (S) $1200
1910.242 B
- Issued
- May 30, 2013
- Abate by
- Jun 21, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air, that was not reduced to less than 30 p.s.i., was used for cleaning purposes without effective chip guarding and personal protective equipment. a) At the CNC machine area- The employer was cleaning the work area with a compressed air hose with more than 60 p.s.i. exposing employees to lacerations hazards.
Recent events (3)
- — J (S) $600
- — C (S) $1200
- — Z (S) $1200
1910.305 G01 IV A
- Issued
- May 30, 2013
- Abate by
- Jun 7, 2013
- Penalty
- Initial $1,200 · Current $600 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) At the finishing area- The employer was using an extension cord to power an air pump as a substitute of fixed wire exposing employees to electrical and fire hazards.
Recent events (3)
- — J (S) $600
- — C (S) $1200
- — Z (S) $1200
1910.305 G01 IV D
- Issued
- May 30, 2013
- Abate by
- Jun 4, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(D): Flexible cords were attached to building surfaces: a) Facility- The employer was using an extension cord attached to the wall to power an air pump as a substitute of fixed wire.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1910.178 L06
- Issued
- May 30, 2013
- Abate by
- Jun 21, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a) At the warehouse- The employer did not certify that each powered industrial truck operator has been trained and evaluated.
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at The Craft-Art Company, INC.
View The Craft-Art Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321999)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338911126.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.