CORSICANA, TX ·
OSHA Inspection: SONIC COMPONENT SYSTEMS LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SONIC COMPONENT SYSTEMS LLC in 1101 N BUSINESS 45, CORSICANA, TX 75110 (NAICS 332618). OSHA activity number 338919772.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SONIC COMPONENT SYSTEMS LLC
- Site address
- 1101 N BUSINESS 45
- City
- CORSICANA
- State
- TX
- ZIP
- 75110
- Mailing
- 1101 N BUSINESS 45, CORSICANA, TX 75110
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332618
- Employees
- 47
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.212 A01
- Issued
- Jun 21, 2013
- Abate by
- Jul 18, 2013
- Penalty
- Initial $4,900 · Current $2,940 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about February 26, 2013, and times prior thereto, the employer does not ensure that machine guarding is provided to protect operators and other employees from caught-in between and struck-by hazards. 1) Pocketing Department Lines 1, 2 and 3, Pocket Formers were not guarded exposing employees to crushing and/or amputation injuries. 2) Bonnell Department the Huajian SX-200s Lines 1-15 Wire Feed Straightener Wheels were not guarded exposing employees to caught-in and/or amputations hazards.
Recent events (2)
- · I (S) $2940
- · Z (S) $4900
1910.219 C03
- Issued
- Jun 21, 2013
- Abate by
- Jul 18, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(3): Vertical or inclined shafting seven -7 feet or less from floor or working platform was not enclosed with stationary casing(s): On or about February 26, 2013, and times prior thereto, employees in the Bonnell Department operating the Huajian SX-200 Formers were exposed to rotating shafts from motor located on the left hand side of the machine exposing employees to caught-in hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 F03
- Issued
- Jun 21, 2013
- Abate by
- Jul 18, 2013
- Penalty
- Initial $4,900 · Current $2,940 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains that were seven (7) or less feet from the floor or platform were not enclosed: On or about February 26, 2013, and times prior thereto, in the Pocketing Department, the Pocket Machines sprockets and chains were not guarded exposing employees to the rotating chains and sprocket wheels.
Recent events (2)
- · I (S) $2940
- · Z (S) $4900
1910.242 B
- Issued
- Jun 21, 2013
- Abate by
- Jul 18, 2013
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: On or about February 26, 2013, the employer did not ensure employees working in the Bonnell Department used compressed air and nozzles that were reduced to 30 P.S.I or less when used for cleaning purposes.
Recent events (2)
- · I (S) $1260
- · Z (S) $2100
1910.305 G02 II
- Issued
- Jun 21, 2013
- Abate by
- Jul 18, 2013
- Penalty
- Initial $2,100 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: On or about February 26, 2013, and times prior thereto, employees operating the #5 Coiler Machine in Bonnell Department with a spliced electrical power cord that did not retain its outer sheath properties exposing employees to electrical shock hazards.
Recent events (2)
- · I (S) $1260
- · Z (S) $2100
1910.305 G02 III
- Issued
- Jun 21, 2013
- Abate by
- Jul 18, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: On or about February 26, 2013, and times prior thereto, the employer did not ensure all cables connected to devices were provided with strain relief exposing employees electrical shock hazards. 1) Bonnell Department #4, Huajian SX-200 foot pedal 2) Bonnell Department #8, Huajian SX-200 foot pedal 3) Bonnell Department #9, Huajian SX-200 foot pedal
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.157 C01
- Issued
- Jun 21, 2013
- Abate by
- Jul 18, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Employer did not provide portable fire extinguishers which were mounted, located, and identified, so as to be readily accessible for employee use: On or about February 26, 2013, and times prior thereto, the employer did not ensure fire extinguishers were mounted were identified exposing employees to fire hazards: 1) West Ware House Excess Storage Area - Corner of Inner Wall 2) Column Outside Break Room 3) Center Column Bonnell Production Department
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1200 F05
- Issued
- Jun 21, 2013
- Abate by
- Jul 18, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein: On or about February 26, 2013, and times prior thereto the employer did not ensure containers containing used chemicals located in the hazardous chemical storage area were labeled exposing maintenance employees to chemical hazards.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Sonic Component Systems LLC
View Sonic Component Systems LLC's full OSHA safety record →
More inspections in this industry (NAICS 332618)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338919772.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.