TOLEDO, OH ·
OSHA Inspection: TOLEDO METAL SPINNING COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TOLEDO METAL SPINNING COMPANY in 1819 CLINTON ST., TOLEDO, OH 43607 (NAICS 332116). OSHA activity number 338924558.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TOLEDO METAL SPINNING COMPANY
- Site address
- 1819 CLINTON ST.
- City
- TOLEDO
- State
- OH
- ZIP
- 43607
- Mailing
- 1819 CLINTON ST., TOLEDO, OH 43607
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 35
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.147 C04 I
- Issued
- Aug 27, 2013
- Abate by
- Sep 28, 2013
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees engaged in the activities covered by this section. a) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not have written energy control procedures that were developed, documented, and utilized to control energy when employees performed maintenance, service, and /or set-up equipment such as, but not limited to, the APT LPS 250 ton hydraulic press Serial # 2500-D12-13-10. b) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not have written energy control procedures that were developed, documented, and utilized to control energy when employees performed maintenance, service, and /or set-up equipment such as, but not limited to, the APT LPS 400 ton hydraulic press Serial #4000-D12-13-13-ES. c) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not have written energy control procedures that were developed, documented, and utilized to control energy when employees performed maintenance, service, and /or set-up equipment such as, but not limited to, the Kamatsu 80 ton hydraulic press Serial # OBS-806-VS-3. d) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not have written energy control procedures that were developed, documented, and utilized to control energy when employees performed maintenance, service, and /or set-up equipment such as, but not limited to, the Kamatsu 200 ton hydraulic press Serial # OBS-200S-VS-3. e) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not have written energy control procedures that were developed, documented, and utilized to control energy when employees performed maintenance, service, and /or set-up equipment such as, but not limited to, the Nova 60 ton hydraulic press Serial # A349-5-98.
Recent events (2)
- · I (S) $1785
- · Z (S) $2975
1910.147 C06 I
- Issued
- Aug 27, 2013
- Abate by
- Sep 28, 2013
- Penalty
- Initial $4,900 · Current $2,940 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. a) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not certify that a periodic inspection of energy control procedures was performed at least annually on equipment such as, but not limited to, the APT LPS 250 ton hydraulic press Serial # 2500-D12-13-10. b) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not certify that a periodic inspection of energy control procedures was performed at least annually on equipment such as, but not limited to, the APT LPS 400 ton hydraulic press Serial #4000-D12-13-13-ES. c) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not certify that a periodic inspection of energy control procedures was performed at least annually on equipment such as, but not limited to, the Kamatsu 80 ton hydraulic press Serial # OBS-806-VS-3. d) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not certify that a periodic inspection of energy control procedures was performed at least annually on equipment such as, but not limited to, the Kamatsu 200 ton hydraulic press Serial # OBS-200S-VS-3. e) Toledo Metal Spinning Company located on 1819 Clinton Street in Toledo, OH; On or about February 28, 2013, the employer did not certify that a periodic inspection of energy control procedures was performed at least annually on equipment such as, but not limited to, the Nova 60 ton hydraulic press Serial # A349-5-98.
Recent events (2)
- · I (S) $2940
- · Z (S) $4900
More inspections at Toledo Metal Spinning Company
View Toledo Metal Spinning Company's full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338924558.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.