PEARLAND, TX ·
OSHA Inspection: SONNY STEEL ERECTORS, INC.
Programmed Related inspection · Safety discipline
At a glance
On , OSHA opened a programmed Related safety inspection of SONNY STEEL ERECTORS, INC. in 1134 OLD ALVIN ROAD, PEARLAND, TX 77584 (NAICS 238120). OSHA activity number 338941727.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SONNY STEEL ERECTORS, INC.
- Site address
- 1134 OLD ALVIN ROAD
- City
- PEARLAND
- State
- TX
- ZIP
- 77584
- Mailing
- 6018 FLINTLOCK RD., HOUSTON, TX 77040
What kind of inspection was it?
- Inspection type
- Programmed Related (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238120
- Employees
- 8
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.1412 F01
- Issued
- May 7, 2013
- Abate by
- May 13, 2013
- Penalty
- Initial $5,390 · Current $4,043 Reduced
General-duty citation text
29 CFR 1926.1412(f)(1): The equipment was not inspected at least every 12 months by a qualified person in accordance with paragraph (d) of this section: a) At the worksite and on March 6, 2013, a Grove extendable boom mobile crane, Model TMS250C-Serial #78408, being used to raise concrete tilt walls, had not been inspected at least every 12 months.
Recent events (2)
- · I (S) $4043
- · Z (S) $5390
1926.1412 E01
- Issued
- May 7, 2013
- Abate by
- May 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1412(e)(1): The equipment in service was not inspected each month in accordance with paragraph (d) of this section (each shift): a) At the worksite and on March 6, 2016, an extendable-boom mobile crane, manufactured by Grove, Serial #78408, being used to lift concrete tilt walls, had not been inspected on a monthly basis.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.1427 A
- Issued
- May 7, 2013
- Abate by
- May 28, 2013
- Penalty
- Initial $2,310 · Current $1,733 Reduced
General-duty citation text
29 CFR 1926.1427(a): The employer did not ensure that, prior to operating any equipment covered under subpart CC, that the person had operated the equipment during a training period in accordance with paragraph (f) of this section, or the operator was qualified or certified to operate the equipment in accordance with the following: a) At the worksite and on March 6, 2013, the employer failed to ensure that a Grove extendable boom crane, Model TMS 250C, Serial #78408 was being operated by an operator who was certified to operate the equipment.
Recent events (2)
- · I (S) $1733
- · Z (S) $2310
1926.1416 E01
- Issued
- May 7, 2013
- Abate by
- May 13, 2013
- Penalty
- Initial $5,390 · Current $4,043 Reduced
General-duty citation text
29 CFR 1926.1416(e)(1): Crane equipment did not have a boom angle or radius indicator readable from the operator's station and alternative measures were not used to determine the booms angle or radius: a) At the worksite and on March 6, 2013, a Grove extendable boom crane, Model TMS 250C, Serial #78408, being used to lift concrete tilt walls, did not have a boom angle indicator or radius indicator and no other means were being used to determine the boom angle or radius.
Recent events (2)
- · I (S) $4043
- · Z (S) $5390
1926.1417 C01
- Issued
- May 7, 2013
- Abate by
- May 13, 2013
- Penalty
- Initial $5,390 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1417(c)(1): 29 CFR 1926.1417(c)(1): The procedures applicable to the operation of the equipment, including rated capacities (load charts), recommended operating speeds, special hazard warnings, instructions, and operator's manual, were not readily available in the cab at all times for use by the operator: a) At the worksite and on March 6, 2013, a Grove extendable boom crane was being used to lift concrete tilt walls. The crane's load charts and operator's manual were not available in the crane's cab.
Recent events (2)
- · I (S) $0
- · Z (S) $5390
More inspections at Sonny Steel Erectors, INC.
View Sonny Steel Erectors, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238120)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 338941727.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.