Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MURDOCK WEBBING COMPANY, INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of MURDOCK WEBBING COMPANY, INC in 27 FOUNDRY ST, CENTRAL FALLS, RI 02863 (NAICS 313312). OSHA activity number 338969371.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Murdock Webbing Company, INC — free Get an email when a new federal OSHA severe-injury report for Murdock Webbing Company, INC is published. One employer, no account, unsubscribe in one click.
Site address
27 FOUNDRY ST
City
CENTRAL FALLS
State
RI
ZIP
02863
Mailing
27 FOUNDRY STREET, CENTRAL FALLS, RI 02863
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
313312
Employees
125
Ownership type
A

3 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 25, 2013
Abate by
May 10, 2013
Penalty
Initial $5,400 · Current $2,700 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    (a) Dyehouse: An energy control procedure was not utilized for the control of hazardous energy while employees were cleaning the Thermasol Range #5, on or about 3-21-13.
Recent events (2)
  • — I (S) $2700
  • — Z (S) $5400

1910.212 A01

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 25, 2013
Abate by
May 10, 2013
Penalty
Initial $2,700 · Current $1,350 Reduced
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts:    (a) Dyehouse: The rotating shaft end of the feed end section on the Thermasol Range #5 was not guarded by an adequate guard or guarding device, on or about 3-21-13.
Recent events (2)
  • — I (S) $1350
  • — Z (S) $2700

1910.1200 F05

Other-than-serious 1 instance 2 exposed
Issued
Apr 25, 2013
Abate by
May 10, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein:  (a) Dyehouse: The spray bottles containing Steam-Pro, an irritant, were not legibly labeled, tagged, or marked with the identity and appropriate hazards warnings of the chemical, on or about 3-21-13.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Murdock Webbing Company, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338969371.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.