THEODORE, AL —
OSHA Inspection: BARNETT MILLWORKS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BARNETT MILLWORKS, INC. in 4915 HAMILTON BLVD., THEODORE, AL 36590 (NAICS 321918). OSHA activity number 338979180.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BARNETT MILLWORKS, INC.
- Site address
- 4915 HAMILTON BLVD.
- City
- THEODORE
- State
- AL
- ZIP
- 36590
- Mailing
- P.O. BOX 389, THEODORE, AL 36590
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 156
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C02 II
- Issued
- May 14, 2013
- Abate by
- May 14, 2013
- Penalty
- Initial $3,375 · Current $2,400 Reduced
General-duty citation text
29 CFR 1910.147(c)(2)(ii): The employer's tagout energy control program procedures did not successfully comply with 29 CFR 1910.147(c)(3) and no lockout was provided for employee protection: a) On or about March 28, 2013 and times prior, lockout/tagout (LO/TO) program: The employer failed to develop and utilize a proper LO/TO procedure for the 12" Horizontal Resaw, Model G0503 for employees when they are changing a new blade on the re-saw to enable employees to control all potential hazardous energy such as 220v electrical.
Recent events (2)
- — I (S) $2400
- — Z (S) $3375
1910.147 D03
- Issued
- May 14, 2013
- Abate by
- May 28, 2013
- Penalty
- Initial $2,700 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): a) On or about March 28, 2013 and times prior, lockout/tagout: The employer failed to ensure employees in the door department used proper lockout procedures when the employees straightened stacked doors at the out-feed end pf the door assembly line. Employees are using switches on the main control panel, which does not control the electrical energy in a safe mode.
Recent events (2)
- — I (S) $0
- — Z (S) $2700
1910.212 A01
- Issued
- May 14, 2013
- Abate by
- Jun 10, 2013
- Penalty
- Initial $0 · Current $1,400
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by caught-between or caught-under: a) On or about March 28, 2013 and times prior at department 18, location 28, door assembly line: The employer failed to ensure guarding was provided at the door stacking end to prevent employees who would walk by or straighten the doors from being caught-between the doors and crane arm.
Recent events (2)
- — I (S) $1400
- — Z (S) $0
1904.32 B03
- Issued
- May 14, 2013
- Abate by
- Jun 10, 2013
- Penalty
- Initial $574 · Current $250 Reduced
General-duty citation text
29 CFR 1904.32(b)(3): 29 CFR 1904.32(b)(3): The Summary of Work-Related Injury and Illnesses (OSHA Form 300A or equivalent) was not properly certified: a) On or about March 28, 2013 and times prior, the OSHA 300A: The employer failed to ensure a company executive certified the 300A summary page and signed it prior to posting it.
Recent events (2)
- — I (O) $250
- — Z (O) $574
More inspections at Barnett Millworks, INC.
View Barnett Millworks, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338979180.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.